Yamaha DSP5D Owner's Manual - Page 309
SURR PARAM (Surround parameter) screen, Channel selection, DIVERGENCE, LFE Low Frequency Effect
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
Information shown in the display Function menu Global functions Output functions SURR PARAM (Surround parameter) screen Here you can perform realtime control of surround panning for the two currently selected input channels. SURR PARAM ❏ If Surround Mode = 6.1ch An F knob for controlling the front divergence and an R knob for controlling the rear divergence are displayed. Use these two knobs to specify the proportion (0-100) at which a signal positioned in the center will be sent to the center buses (C, S, Bs) and the left/right buses (L, R, Ls, Rs). In 6.1ch mode, a LINK button that links the front and rear divergence is displayed between the F knob and R knob. When you turn the LINK button on, the F knob value will be copied to the R knob, and the F knob and R knob values will be linked. C LFE (Low Frequency Effect) This adjusts the output level of the signal sent from the input channel to the LFE (Low Frequency Effect) bus for a subwoofer. You can use the ON/OFF button to switch the signal sent from the input channel to the LFE bus on/off. The LFE knob and ON/OFF button are displayed only when the surround mode is 5.1ch or 6.1ch. 1 4 2 3 A Channel selection Select the two adjacent odd-numbered/even-numbered input channels (or ST IN channel L/R) that you want to control. The names of these channels are displayed at the right. B DIVERGENCE These controls specify the proportion at which the signals are sent to each surround bus when the input channel is positioned in the center. Depending on the currently selected surround mode, the displayed parameters will differ as follows. ❏ If Surround Mode = 3-1ch/5.1ch A knob for controlling the front divergence is displayed. Use this knob to specify the proportion (0- 100) at which a signal positioned in the center will be sent to the center bus (C) and the left/right buses (L, R). With a setting of 0 the signal will be sent only to the left/right buses, and with a setting of 100 it will be sent only to the center bus. With a setting of 50, the signal will be sent at the same level to the left/right and center buses. 56 7 D Surround pan grid This grid lets you control the surround panning, with the listening point at the center. The current setting is indicated by a O symbol. E Position buttons These buttons correspond to each surround bus. When you click a button, the surround panning will move to that position. F SURROUND BUS ON/OFF buttons These buttons are on/off switches for the signal sent from the input channel to the corresponding surround bus. G Surround pan position This indicates the coordinate locations of the O symbol in the left/right direction and the front/rear direction. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 309
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/309.png)