Yamaha DSP5D Owner's Manual - Page 189
Tx MIDI transmission, Rx MIDI reception, ECHO MIDI message echo output
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Information shown in the display Function menu Global functions Output functions BANK ON/OFF If this button is on, bank select messages will be transmitted and received in Single mode (this is unavailable in Multi mode). MULTI If this button is on, program changes will be transmitted/received on multiple MIDI channels (Multi mode). Hint • If program change reception is on, the PM5D's scenes or effects will switch when the appropriate program change is received from an external device. Additionally, if transmission is on, program changes will be transmitted to an external device when scenes or effects are switched on the PM5D. • The scene/effect assignment for each program change number is made in the MIDI PGM CHANGE screen (➥ p.190). • CONTROL CHANGE MODE In this area you can select the control change transmission/reception method. NRPN If this button is on, PM5D mix parameters will be transmitted/received as NRPN messages. TABLE [SINGLE] If this button is on, PM5D mix parameters will be transmitted/received as control change messages on a single MIDI channel. TABLE [MULTI] If this button is on, PM5D mix parameters will be transmitted/received as control change messages on multiple MIDI channels. Hint • If control change reception is on, the PM5D's parameters will change when the appropriate control change is received from an external device. If transmission is on, a control change will be transmitted to an external device when you edit a parameter on the PM5D. • If NRPN is selected as the control change mode, the assignment of parameters to NRPN is pre-defined and cannot be changed. • If TABLE [SINGLE] or TABLE [MULTI] is selected as the control change mode, the parameter assignment for each control number can be edited in the MIDI CTRL CHANGE screen (➥ p.191). B Tx (MIDI transmission) Here you can make various settings for transmission of MIDI messages. • MIDI PORT Tx (MIDI transmission port) Select the port at which the PM5D will transmit MIDI messages. You have the following choices. MIDI The rear panel MIDI IN connector USB The rear panel USB connector SLOT 1-4 . . . A card that supports serial transmission and is installed in rear panel slot 1-4 Move the cursor to this box and turn the [DATA] encoder or click the / buttons at left or right to change the setting; then press the [ENTER] key to finalize the change. If you select USB or SLOT 1-4, you will need to specify the port number (1-8) in the field on the right (Depending on the card that is installed, some slots may have only one port.) • SINGLE MODE MIDI CH Tx (MIDI transmission channel for Single mode) Select the MIDI channel on which the PM5D will transmit program changes, control changes, parameter changes, and bulk data. (This setting is valid only in Single mode.) Move the cursor to this box and turn the [DATA] encoder or click the / buttons at left or right to change the setting; then press the [ENTER] key to finalize the change. • PROGRAM CHANGE Tx (Program change transmission) • CONTROL CHANGE Tx (Control change transmission) • PARAMETER CHANGE Tx (Parameter change transmission) These buttons turn transmission on/off for program changes, control changes, and parameter changes respectively. Hint Parameter changes are a method by which PM5D parameters are transmitted in the form of system exclusive messages. • MIDI THRU Tx (Thru output) Select the port from which messages input to MIDI THRU Rx will be output. The selection method is the same as for MIDI PORT Tx. C Rx (MIDI reception) Here you can make various settings for reception of MIDI messages. • MIDI PORT Rx (MIDI reception port) Select the port from which the PM5D will receive MIDI messages. • SINGLE MODE MIDI CH Rx (MIDI reception channel for Single mode) Select the MIDI channel on which the PM5D will receive program changes, control changes, parameter changes, and bulk data. (This setting is valid only in Single mode.) • PROGRAM CHANGE Rx (Program change reception) • CONTROL CHANGE Rx (Control change reception) • PARAMETER CHANGE Rx (Parameter change reception) These buttons turn transmission on/off for program changes, control changes, and parameter changes respectively. • MIDI THRU Rx (Thru input) Here you can select the port that will "thru input" the received MIDI messages. D ECHO (MIDI message echo output) Here you can select whether received program changes, control changes, parameter changes, and other MIDI messages will be echoed out from the MIDI transmission port. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 189
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/189.png)