Yamaha DSP5D Owner's Manual - Page 93

❏ Other parameters 1 2 3 4 5 6 A DCA/GEQ/EFFECT These buttons specify whether DCA groups, GEQ modules, and internal effects will be excluded from (or subject to) Recall. Note DCA groups provide a WITH NAME button. This button excludes the DCA group name from the recall operation (or selects it as the object of recall). B MUTE MASTER This button specifies whether the Mute Master key on/ off status will be excluded from (or subject to) Recall. C MIDI REMOTE (PM5D only) These buttons specify whether MIDI remote layers A- D will be excluded from (or subject to) Recall. D PLUG-IN (PM5D only) These buttons specify whether the Waves plug-in DSP cards Y96K installed in slots 1-4 will be excluded from (or subject to) Recall. E SET ALL This button turns on all buttons for parameters 1-4. F CLEAR ALL This button turns off all buttons for parameters 1-4. 4 In the upper left of the screen, switch the SELECTIVE RECALL ENABLED/DISABLED button to ENABLED. When this button is set to ENABLED, the Selective Recall function will apply to subsequently-stored scenes. 5 Store the current scene. The settings of the SELECTIVE RECALL screen will be saved as part of the scene. When you recall this scene, only the selected channels/parameters will be excluded from (or subject to) Recall. Note • If you edit the settings of the SELECTIVE RECALL screen, you must store that scene in order to make your changes effective. • Recall Safe and Selective Recall can be used together. Channels/parameters excluded from recall operations by either Recall Safe or Selective Recall (or both) will not be recalled. 10 Scene memory PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 93