Yamaha DSP5D Owner's Manual - Page 157
In the CASCADE I/O ASSIGN VIEW area, use, the CASCADE IN and CASCADE OUT ON/OFF
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
• SCENE STORE/EDIT Scene store operations, store undo operations, title editing, sorting • CUE/SOLO LOGIC Cue/Solo operations • DIMMER ON/OFF Dimmer effect (including talkback dimmer) • PAGE CHANGE Switching the display screen • DCA FADER MODE Switching the mode of the top panel FADER MODE section • ENCODER MODE Switching the mode of the top panel ENCODER MODE section • PANEL/LCD BRIGHTNESS BRIGHTNESS settings in the PREFERENCE 2 screen (UTILITY function) • INPUT METER POINT/OUTPUT METER POINT/ PEAK HOLD Input channel / output channel metering point selection, and peak hold on/off • DCA LEVEL/MUTE DCA group 1-8 level, name, [CUE] key on/off operations, and [MUTE] key on/off operations • MUTE MASTER Mute group 1-8 on/off Note • Note that linking is enabled only if the LINK buttons for the same item are turned on for both the cascade master unit and the cascade slave unit. • If you have cascade-connected three or more PM5D units in a daisy-chain, you can also turn linking off for the cascade master but on between the cascade slaves. Hint DCA and MUTE parameter values will be linked as soon as linking is turned on. CUE/SOLO will be initialized as soon as linking is turned on. Other parameters will be linked only when that parameter is first operated after Link is turned on. 3 In the CASCADE I/O ASSIGN VIEW area, use the CASCADE IN and CASCADE OUT ON/OFF buttons to specify whether each bus will transmit or receive audio signals to or from the external cascade-connected device. CASCADE IN SOURCE area CASCADE IN ON/OFF buttons PARAM LINK buttons CASCADE OUT ON/OFF buttons The CASCADE IN and CASCADE OUT ON/OFF buttons specify whether signals of each bus will be transmitted to or received from the cascade-connected external device. These settings are made independently for each bus; MIX buses 1-24, STEREO A bus L/R, STEREO B bus L/R, and CUE bus L/R. Buses whose CASCADE IN button is on will receive signals from the external device; buses whose CASCADE OUT button is on will send signals to the external device. The CASCADE IN SOURCE fields indicate each of the source buses. If the other cascade-connected device is a PM5D or DSP5D, these assignments are fixed and cannot be modified. Note • When two PM5D units are cascade-connected, signal transmission and reception is enabled if the CASCADE OUT button of the transmitting unit and the CASCADE IN button of the receiving unit are both turned on for the same bus. • If a device other than the PM5D/DSP5D is selected as the other cascade-connected device, the transmission source indication shown in the CASCADE IN SOURCE field will change (➥ p.227). 4 Using the PARAM LINK ON/OFF button located in the CASCADE I/O ASSIGN VIEW area, specify whether channel parameters will be linked between machines. You can specify this for every two adjacent odd-numbered/even-numbered channels. Turn this on if you want each machine to output the same signal. 5 Set the CASCADE ENABLED/DISABLED button to ENABLED. When you click the DISABLED button, it may take up to 10 minutes for cascade connection to be enabled. The cascade connection will be enabled when the CASCADE ENABLED/DISABLED button is set to ENABLED on both the cascade master and the cascade slave. Note If the word clock becomes unlocked while the machines are synchronized (before cascade connection is enabled), the operation of each machine may become unstable. If this occurs, please power-cycle each machine. Other functions 19 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 157
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/157.png)