Yamaha DSP5D Owner's Manual - Page 245

Information shown in the display Function menu Global functions D ASSIGN For each output channel, this indicates the number of output ports that are currently assigned as insert-out. E Grid For each output channel (vertical column), this grid lets you can patch one or more output ports (horizontal row) to be used as insert-outs. Currently-patched grids are indicated by a symbol. By clicking a grid location you can set/cancel patching. The red lines at the left and top indicate the grid location to which you move the cursor. Hint Operations in the grid are the same for all of the patching screens. For details, refer to the Hint on p.243. F Output port From the top, this area indicates the type of output port, the ID number, the output channel number, and the number of output channels assigned. The following types of output port can be patched as insert-out. MIX OUT MIX OUT jacks 1-24 SLOT OUT Output channels of an I/O card installed in slots 1-4 FX IN L/R inputs of internal effects 1-8 GEQ IN Inputs of internal GEQ modules 1-20 2TR OUT L/R channels of 2TR OUT DIGITAL jacks 1-3 Note On the DSP5D, you can choose from OMNI OUT 1-24, SLOT OUT 1-4 (SLOT OUT 3-4 is the CASCADE OUT connector), FX IN 1-8, and GEQ IN 1-20. Hint If you select FX IN as an insert-out, the output of the same internal effect will automatically be selected as the insert-in. If you select GEQ IN, the output of the same GEQ module will automatically be selected as the insert-in. GEQ OUT 2TR IN Outputs of GEQ modules 1-20 L/R channels of 2TR IN DIGITAL jacks 1-3 and 2TR IN ANALOG jacks 1/2 Note On the DSP5D, you can choose from OMNI OUT 1-24, SLOT OUT 1-4 (SLOT OUT 3-4 is the CASCADE OUT connector), FX IN 1-8, and GEQ IN 1-20. 9 I LIBRARY button This button accesses the OUTPUT PATCH LIBRARY screen (➥ p.247), where you can store/recall patch library settings for output channels. ❏ Using the [SHIFT] key + CURSOR to move the cursor When operating from the panel, you can move the cursor from the right side of the screen to the left side (or vice versa) by holding down the [SHIFT] key and using the CURSOR [√]/[®] keys. To quickly move the cursor in or out of the grid, hold down the [SHIFT] key and press the CURSOR keys. Cursor ➠ 8 [SHIFT] key + CURSOR [®] key Output functions Input functions Appendices 7 G ASSIGN For each input channel, this indicates the number of input ports that are currently assigned as insert-in. H Input port From the top, this area indicates the type of input port, the ID number, the input channel number, and the number of input channels assigned. The following types of input port can be selected. AD IN AD ST IN SLOT IN FX OUT INPUT jacks 1-48 ST IN jacks 1-4 L/R Input channels of an I/O card installed in slots 1-4 L/R outputs of internal effects 1-8 Cursor will move Note To enable an insert-in assigned to an output channel in this screen, you must turn on the ON/OFF button for the corresponding output channel in the INSERT POINT screen (OUTPUT PATCH function). (➥ p.246) However, the insertout is always on, regardless of the state of the ON/OFF button. An exception to the above is that if you insert GEQ, its insert-in will automatically be on. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 245