Yamaha DSP5D Owner's Manual - Page 265
Bsend Level/send Point, Level Copy [all Matrix, X All Matrix], All On [all Mix, Yellow
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
Information shown in the display ❏ When the MTRX from MIX button is on You can view the status of the signals sent from all MIX channels or STEREO A/B channels to a specific MATRIX bus. dow appears, select one of the following choices to copy, and click the OK button. Function menu Global functions Output functions Input functions B SEND LEVEL/SEND POINT Select one of the following two parameters to view in the grid. ❏ When the SEND LEVEL button is on The send levels sent from the MIX channels or STEREO A/B channels to the MATRIX buses will be shown as a bar graph in each grid. Channels for which the signal sent to the MATRIX bus is turned off are shown by gray bars, and channels for which the signal is turned on are shown by blue bars. Pan value (orange line) Channels for which the signal sent to the MATRIX bus is turned off (gray bar graph) Channels for which the signal sent to the MATRIX bus is turned on (blue bar graph) To edit the send level, move the cursor to the grid where the MIX or STEREO A/B channel (vertical column) intersects the MATRIX bus (horizontal row), and turn the [DATA] encoder. To switch the signal sent from a specific MIX or STEREO A/B channel to the MATRIX buses on/off, move the cursor to the vertical column for that channel, and press the [ENTER] key. Hint • If the send level is set above nominal (0 dB), a red line indicating nominal level is displayed. • If the send-destination MATRIX channel is paired, the grid for the odd-numbered MATRIX bus will show an orange line indicating the pan value instead of a bar graph. (In MTRX from MIX mode, upward indicates R, and downward indicates L.) If the SEND LEVEL button is on, you can select a desired grid and copy its send level (pan) value to other channels (horizontal direction) or to other MATRIX buses (vertical direction), or switch all grids on/off simultaneously. To do so, move the cursor to the desired grid; then hold down the [SHIFT] key and press the [ENTER] key. (Alternatively, hold down the [SHIFT] key and click the desired grid.) When the JOB SELECT win- LEVEL COPY [ALL MATRIX ] Copy the send level (pan) value of the selected grid to all send level (pan) settings of the corresponding MIX (or STEREO A/B) channel in the vertical direction of the grid. Note If the selected grid is a send level, only the send levels will be copied. If the selected grid is a pan value, only the pan values will be copied. LEVEL COPY [ALL MIX ] Copy the send level (pan) value of the selected grid to all send level (pan) settings of the corresponding MATRIX bus in the horizontal direction of the grid. LEVEL COPY [ALL MIX x ALL MATRIX] Copy the send level (pan) value of the selected grid to the send level (pan) settings of all MIX (and STEREO A/B) channels and MATRIX buses. ALL ON [ALL MIX ] Turn on the signals sent from all channels (MIX, STEREO A/B) to the corresponding MATRIX bus. ALL OFF [ALL MIX ] Turn off the signals sent from all channels (MIX, STEREO A/B) to the corresponding MATRIX bus. ❏ When the SEND POINT button is on The grid will show the position from which the signal is sent from the MIX channels or STEREO A/B channels to the MATRIX buses. PRE FADER POST FADER POST ON Each indication has the following significance. (yellow) . . PRE FADER (immediately before the fader) (gray) . . . . POST FADER (immediately after the fader) (red) . . . . . POST ON (immediately after the [ON] key) PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 265 Appendices
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/265.png)