Yamaha DSP5D Owner's Manual - Page 57
MIX Items in the MIX Sending signals from MIX channels to, output jacks
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
MIX section The MIX section adjusts the send level of the signals sent from input channels to MIX buses, and adjusts the output level of the MIX channels. Items in the MIX section 3 4 12 5 6 9J trols of the MIX section to edit the send level and on/ off status of the signal being sent from the currently selected input channel to the MIX buses. Controls other than 4-6 will have no effect. When the [MIX MASTER] key is on, you can use the controls of the MIX section to edit the output level and on/off status of the MIX channels. Operations in the MIX section 7 ❏ Sending signals from MIX channels to 6 8 output jacks Here's how a signal sent from an input channel to a MIX bus can be sent from the corresponding MIX OUT jack. Output channel operations 1 Make sure that an appropriate signal is being sent from an input channel to the MIX bus. 2 Press the [MIX MASTER] key in the MIX section. When this key is on, you can use the MIX section to control the signals being sent from the MIX channels to the MIX OUT jacks. A [TO ST] LED This LED will light when the signal sent from the MIX channel to the STEREO bus is on. B [TO MTRX] LED This LED will light when the signal sent from the MIX channel to the MATRIX bus is on. C DCA group LEDs The LED of the DCA group to which this MIX channel is assigned will light. D MIX [PAIR] LED This LED will light if adjacent odd-numbered/evennumbered MIX channels are paired. 3 Turn on the MIX [ON] key for the MIX channel whose signal you want to output. 4 Turn the MIX encoder to adjust the output level of the corresponding MIX channel. The signal of the corresponding MIX channel will be sent from the corresponding MIX OUT jack. 5 If you want the meters of the panel to indicate the output level of the MIX channels, press the [MIX/MATRIX] key of the meter section. The output level of the MIX channels will be shown by the [INPUT/MIX] meters. E MIX [ON] key If the [MIX SEND] key (9) is on, this switches the signal sent from the input channel to the MIX bus on/off. If the [MIX MASTER] key (J) is on, this switches the MIX channel on/off. F MIX encoder If the [MIX SEND] key (9) is on, this adjusts the send level to the MIX bus. If the [MIX MASTER] key (J) is on, this adjusts the output level of the MIX channel. G MIX [CUE] key This is used to monitor a MIX channel via the Cue Monitor/Solo function. INPUT/MIX meters 12345678 OVER -3 -6 -9 -12 -15 -18 -24 -30 -40 -50 -60 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 OVER -3 -6 -9 -12 -15 -18 -24 -30 -40 -50 -60 CH 1 -24 ST IN/ /ST IN MIX MATRIX PEAK HOLD [MIX/MATRIX] key H MIX [SEL] key This selects the MIX channel to which operations in the SELECTED CHANNEL section or in the display will apply. I [MIX SEND] key J [MIX MASTER] key These keys switch the operation of the MIX section. When the [MIX SEND] key is on, you can use the con- PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 57
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/57.png)