Yamaha DSP5D Owner's Manual - Page 270
OUTPUT VIEW function, CH VIEW (Channel view) screen
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
OUTPUT VIEW function OUTPUT VIEW function CH VIEW (Channel view) screen This screen displays the mix parameters of the currently selected MIX channel, MATRIX channel, or STEREO A/B channel. In this screen you can also edit the principal parameters and access other screens. CH VIEW If you click the mini-graph, the EQ PARAM screen for that channel will appear. C Compressor This area shows the amount of gain reduction and the output level of the compressor, a mini-graph showing the approximate response of the compressor, and the compressor on/off status. You can click the COMP ON/OFF button to switch the compressor on/off in this screen. If you click the mini-graph, the COMP PARAM screen for that channel will appear. D Insert in This area indicates the insert point, the insert on/off status, and the type and input level of the port that is patched to insert-in. You can click the INSERT ON/ OFF button to switch insertion on/off in this screen. If an internal effect is patched, the effect type and BYPASS button are displayed. If a GEQ module is patched, the GEQ ON/OFF button and a mini-graph showing the GEQ response are displayed. 5 1 2 3 6 4 A Channel This is the number of the channel you are editing. If the corresponding MIX/MATRIX channel is paired (or if a STEREO A/B channel is selected), a heart symbol is displayed at the right. You can click this symbol to enable/disable pairing for the MIX/MATRIX channel. Note The screen shown above is for when a paired channel is selected. If the selected channel is not paired, the parameters for only one channel are displayed, and pairing-related settings are not displayed. B EQ This area shows the post-EQ level, the approximate EQ response, and the EQ on/off status. You can click the EQ ON/OFF button to switch EQ on/off in this screen. E DELAY In this area you can view and edit the delay time of the internal delay and its on/off status. F TO MATRIX (only for MIX channels and STEREO A/B channels) This area shows the send level, send position, and on/ off status of the signals sent from the corresponding MIX channel or STEREO A/B channel to MATRIX buses 1-8. You can also edit the send level, send position, and on/off status in this screen. Here's how to do this. • To edit the send level of signals sent to the MATRIX bus Move the cursor to the desired bar graph in the list, and turn the [DATA] encoder. • To edit the send position of signals sent to the MATRIX bus Click either the PRE FADER, the POST FADER, or the POST ON button located below. Alternatively, you can edit the setting by moving the cursor to the PRE or POST indication in the list and pressing the [ENTER] key or turning the [DATA] encoder. 270 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/270.png)