Yamaha DSP5D Owner's Manual - Page 118

15 Graphic EQ and Parametric EQ 15 Graphic EQ and Parametric EQ The PM5D provides twelve units of 31-band graphic EQ or 8-band parametric EQ (expandable to a maximum of twenty units). This chapter explains how to use the graphic EQ and parametric EQ. Patching the GEQ modules The GEQ module built into the PM5D can be inserted into the insert-out/in of the desired channel. As an example, here's how to insert GEQ module into the STEREO A channel. 1 In the DISPLAY ACCESS section, repeatedly press the [GEQ] key to access the GEQ PARAM screen. In this screen you can select a GEQ module, specify the channel into which it will be inserted, and edit its parameters. GEQ PARAM INSERT box MODULE box GEQ/PEQ button INS MON L-INS MON C MONITOR channel (L/R/C) insert (PM5D only) in/out If an insert destination is already assigned, a window will appear when you click within the box, asking you to confirm the change. Click the OK button to execute. 5 In the upper left of the screen, click the / buttons at the left and right of the MODULE box to select another GEQ module, and assign it to ST AR [INS] (STEREO A R channel insertin) in the same way. 6 Click the GEQ ON/OFF button to turn it on. Note When you insert a GEQ module, the insert-in for the channel will be enabled automatically. 7 In the DISPLAY ACCESS section, repeatedly press the OUTPUT [PATCH] key to access the INSERT POINT screen. INSERT POINT 2 Click the / buttons at the left and right of the MODULE box in the upper left of the screen to select the GEQ module you want to operate. 3 Click the GEQ/PEQ button located in the upper middle of the screen, to switch between 31-band graphic EQ and 8-band parametric EQ. 4 Click the / buttons at the left and right of the INSERT box to select ST AL [INS] (STEREO A L channel insert-in/out) as the channel into which the GEQ module will be inserted, and press the [ENTER] key (or click within the box). You can choose one of the following insert destinations. INS CH 1-INS CH 48 INS STIN1L-INS STIN4R INS MIX 1-INS MIX 24 INS MTRX1-INS MTRX8 INS ST AL/INS ST AR INS ST BL-INS ST BR Input channel 1-48 insert in/out ST IN channel 1-4 (L/R) insert in/ out MIX channel 1-24 insert in/out MATRIX channel 1-8 insert in/out STEREO A channel (L/R) insert in/out STEREO B channel insert in/out ON/OFF button Insert point 8 If desired, change the insert point for the STEREO A channel into which you inserted the GEQ module. When you insert a GEQ module, the insert-in point for that channel will be enabled automatically. Note • If you inserted a GEQ module into an input channel, repeatedly press the INPUT [PATCH] key to access the INSERT/ DIRECT OUT POINT screen (INPUT PATCH function), and edit the settings in the same way. • You can also insert a GEQ module into the desired channel's insert-in/out by using the INSERT PATCH screen (INPUT PATCH function and OUTPUT PATCH function). 118 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section