Yamaha DSP5D Owner's Manual - Page 82
Using DCA Groups, Assigning channels to DCA groups, To select the DCA groups to which
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
9 Items in the DCA strip F DCA [CUE] key This key is used to cue-monitor all channels assigned to that DCA group. Using DCA Groups Here we explain how to assign channels to DCA groups and use the DCA faders to control them. Assigning channels to DCA groups From the panel, you can assign channels to DCA groups either by selecting a specific channel and specifying the DCA group to which it will belong, or by selecting a specific DCA group and specifying the channels that will belong to that DCA group. ❏ To select the DCA groups to which a specific channel will belong 1 Press a [SEL] key to select the channel for which you want to make assignments. 2 In the SELECTED CHANNEL section, press a DCA [1]-[8] key to select the DCA group to which the channel will be assigned (you may select more than one DCA group). The LEDs will light for DCA [1]-[8] key(s) that are turned on. If an input channel is selected, its corresponding DCA assign LED(s) in the channel strip will also light. DCA [1]-[8] keys DCA assign LEDs ❏ To select the channels that will belong to a specific DCA group 1 In the ASSIGN MODE section, press the ASSIGN MODE [DCA] key. The ASSIGN MODE [DCA] key will blink. The [DCA] key of the FADER MODE section will also blink. While this key is blinking, you can use the [CUE] key of each channel to assign that channel to a DCA group. 2 Press a DCA [CUE] key in the DCA strip to select the DCA group (1-8) to which you want to assign channels. 3 Press the [CUE] key of input channels / output channels (you may select more than one) to assign them to the selected DCA group. If a DCA group 1-6 is selected, you can select only input channels. If a DCA group 7/8 is selected, you can select input channels and output channels. If an input channel is selected, its corresponding DCA assign LED(s) in the channel strip will also light. 4 Assign channels to other DCA groups in the same way. 5 When you have finished making assignments, press the ASSIGN MODE section ASSIGN MODE [DCA] key to make its LED go dark. The FADER MODE section [DCA] key will also stop blinking, and return to its previous state. Hint • You can also assign channels to DCA groups from within the display. Input channel DCA assignments are made in the INPUT DCA/GROUP function DCA GROUP ASSIGN screen (➥ p.296), and output channel DCA assignments are made in the OUTPUT DCA/GROUP function DCA GROUP ASSIGN screen (➥ p.258). • DCA group settings are saved as part of the scene. 3 Select the DCA group(s) for other channels in the same way. 82 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section