Yamaha DSP5D Owner's Manual - Page 243
Output functions, OUTPUT PATCH function
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
Information shown in the display Function menu Global functions Output functions Output functions OUTPUT PATCH function OUTPUT PATCH screen Here you can make patch settings to send output channel signals to the outputs of I/O cards installed in the MIX OUT jacks and slots, to the input of internal effects, and to the 2TR OUT DIGITAL jacks. OUTPUT PATCH 1 5 2 3 4 A SELECTED PATCH This indicates the output channel number, name and output port of the grid at which the cursor is located. B CH (Output channel) This is the number and name of the output channel (MIX channel, MATRIX channel, STEREO A/B channel, MONITOR L/R/C channel, CUE L/R channel, TALKBACK OUT channel, OSC OUT channel) whose output destination will be patched. The channel number at which the cursor is located will be highlighted. When you click the name area, a window will appear, allowing you to assign a name to the channel. Note On the PM5D, this is unavailable for the CUE L/R channels; on the DSP5D, this is unavailable for the MONITOR L/R/C channels. C ASSIGN For each output channel, this indicates the number of output ports that are currently assigned. D Grid This grid lets you patch output ports (horizontal rows) to output channels (vertical columns). Currentlypatched grids are indicated by a symbol. By clicking a grid location you can set/cancel patching. The red lines at the left and top indicate the grid location to which you move the cursor. Hint • If PATCH CONFIRMATION is turned on in the PREFERENCE 1 screen (UTILITY function), a confirmation message will appear each time you attempt to change a patch setting. If STEAL PATCH CONFIRMATION is turned on, a confirmation message will also appear when you attempt to make patch settings that would cause an existing patch to be modified. • To move the cursor location rapidly in or out of the grid, hold down the [SHIFT] key and press the CURSOR keys. • To move rapidly to left or right inside the grid, turn the [DATA] encoder. To move up or down, hold down the [SHIFT] key and turn the [DATA] encoder. Note You can patch an output channel to more than one output port, but you cannot patch multiple output channels to a single output port. E Output port From the top, this area indicates the type of output port, the ID number, the output channel number, and the number of output channels assigned. The following types of output port can be selected. MIX OUT MIX OUT jacks 1-24 SLOT OUT Output channels of an I/O card installed in slots 1-4 FX IN L/R inputs of internal effects 1-8 (MIX channels are the only output channels that can be selected) 2TR OUT L/R channels of 2TR OUT DIGITAL jacks 1-3 Note On the DSP5D, you can choose from OMNI OUT 1-24, SLOT OUT 1-4 (SLOT OUT 3-4 is the CASCADE OUT connector), and FX IN 1-8. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 243