Yamaha DSP5D Owner's Manual - Page 262
MATRIX/ST function, MATRIX/ST ROUTING screen
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
MATRIX/ST function 34 C SET BY CUE (Assign by [CUE] key) This specifies whether the [CUE] key will be used to make/cancel compressor link group assignments. While the compressor link group SET BY CUE button is on, pressing the [CUE] key of a channel that can be assigned to the corresponding group will assign the channel to the group. (Press the [CUE] key once again to cancel the assignment.) Hint The SET BY CUE button can be turned on for only one compressor link group. This is automatically turned off when you change screens or turn off the power. D CLEAR This button clears all output channels assigned to that compressor link group. MATRIX/ST function MATRIX/ST ROUTING screen Here you can send the signal from MIX channels and STEREO A/B channels to the STEREO bus or the desired MATRIX bus. MATRIX/ST ROUTING 1 2 MIX channel STEREO A/B channel A MATRIX bus This is the number of the MATRIX bus to which the signal is sent. Paired MATRIX channels are indicated by a heart symbol displayed between them. You can click this symbol to enable/disable pairing. B Send level These knobs specify the send level of each signal that is sent from the MIX channel or STEREO A/B channel (vertical column) to the MATRIX buses (horizontal row). The knobs shown in this area will depend on how the MATRIX channels are paired. 262 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/262.png)