Yamaha DSP5D Owner's Manual - Page 86
CUE button for the corresponding link group, in the screen to turn it on.
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
9 Items in the DCA strip 2 Click the grid at which the desired channel (assignment source) intersects the desired link group (assignment destination). A " " symbol will appear at the corresponding grid. To cancel the assignment, click the " " symbol once again. In the case of output channel EQ link groups, MIX channels and STEREO A/B channels can be assigned only to groups A-F, and MATRIX channels can be assigned only to groups G/H. (Unavailable grids are grayed-out.) If another channel is already assigned to the assignment-destination group, the EQ and compressor parameters of the previously-assigned channel will be copied to the channel that is added later, causing the settings to be the same. 3 If you want to use the [CUE] key of each channel to assign it to a link group, click the SET BY CUE button for the corresponding link group in the screen to turn it on. While the SET BY CUE button is on, you can use the channel [CUE] keys to set or cancel link group assignments. SET BY CUE button Note • The SET BY CUE button can be turned on for only one link group. • When you switch to a different screen, the SET BY CUE button that was turned on will automatically be defeated. 4 When you have finished making link group assignments, operate the EQ or compressor parameters of a channel belonging to a link group. The EQ or compressor parameters of channels belonging to the same link group will follow your editing. Hint Link group settings are saved as part of the scene. Note The STEREO LINK button and KEY IN SOURCE settings are not linked even for channels belonging to the same compressor link group. 86 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section