Yamaha DSP5D Owner's Manual - Page 53
Enabling/disabling pairing
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Enabling/disabling pairing Monaural input channels can be paired to link their principal parameters. There are two types of pairing; you can use only one type. • Horizontal pair mode This mode pairs adjacent odd-numbered/even-numbered channels (default setting). ❏ Using horizontal pairing Here's how to enable or defeat pairing for adjacent oddnumbered/even-numbered channels. 1 To enable pairing, hold down the [SEL] key of one of the adjacent odd-numbered/even-numbered channels, and press the [SEL] key of the other channel. The parameters of the channel you pressed first will be copied to the subsequently-pressed channel. Hint The copy-source channel is determined by the order in which you press the [SEL] keys. For example if you hold down the channel 1 [SEL] key and press the channel 2 [SEL] key, the channel 1 parameters will be copied to channel 2. 5 Horizontal pair 2 To defeat pairing, hold down the [SEL] key of one of the paired channels and press the [SEL] key of the other channel. Note If you are unable to enable/defeat pairing by using the above procedure, make sure that MAKE PAIR ON PANEL is turned on in the UTILITY function PREFERENCE 1 screen (➥ p.206). Input channel operations • Vertical pair mode This mode pairs channels of different layers that share the same fader. ❏ Using vertical pairing Here's how to enable or disable pairing for channels of different layers that share the same fader. 1 Repeatedly press the [SYS/W.CLOCK] key of the DISPLAY ACCESS section until the MIXER SETUP screen appears. MIXER SETUP VERTICAL PAIR button Vertical pair Hint Input channels that are paired will have their parameters linked except for head amp, delay, pan, attenuation, and phase. Note If the PM5D is cascade-connected to the DSP5D, pairing can be specified only within each individual machine. PAIR MODE area 2 Click the VERTICAL PAIR button in the PAIR MODE area to turn it on. A window will appear, asking you to confirm that you want to change the pair mode. 3 Click the OK button. Now you can use "vertical pair" mode. When you switch to "vertical pair" mode, new numbers will be assigned to the input channels. For details, refer to p.221. You can return to "horizontal pair mode" by clicking the HORIZONTAL PAIR button to turn it on. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 53