Yamaha DSP5D Owner's Manual - Page 385
Analog Input Characteristics DSP5D, PM5D-RH, For Use
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 385 highlights
Information shown in the display Function menu Global functions Output functions ❏ Analog Input Characteristics (DSP5D) Input Terminals INPUT 1-48 ST IN 1-4 [L,R] GAIN -62 dB +10 dB -62 dB +10 dB Actual Load For Use With Impedance Nominal 50-600Ω Mics 3kΩ & 600Ω Lines 50-600Ω Mics 3kΩ & 600Ω Lines Sensitivity *1 -82 dBu (61.6 µV) -10 dBu (245 mV) -82 dBu (61.6 µV) -10 dBu (245 mV) Input Level Nominal -62 dBu (0.616 mV) +10 dBu (2.45 V) -62 dBu (0.616 mV) +10 dBu (2.45V) Max. before clip -42 dBu (6.16 mV) +30 dBu (24.5 V) -42 dBu (6.16 mV) +30 dBu (24.5 V) Connector XLR-3-31 type (Balanced) *2 XLR-3-31 type (Balanced) *2 *1. Sensitivity is the lowest level that will produce an output of +4 dBu (1.23 V) or the nominal output level when the unit is set to maximum gain. (all faders and level controls are maximum position.) *2. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) * In these specifications, 0 dBu = 0.775 Vrms. * All input AD converters are 24bit linear, 128 times (@48 kHz) oversampling. * +48V DC (phantom power) is supplied to INPUT (1-48) XLR type connectors via one master and each individual software switches. ❏ Analog Output Characteristics (PM5D, PM5D-RH) Output Terminals Actual Source For Use With Impedance Nominal STEREO A,B [L,R] 150Ω 600Ω Lines MONITOR OUT [L,R,C] 150Ω 600Ω Lines CUE OUT [L,R] 150Ω 600Ω Lines MATRIX OUT 1-8 150Ω 600Ω Lines MIX OUT 1-24 150Ω 600Ω Lines INSERT OUT 1-48 PHONES (x 2) 150Ω 15Ω 10kΩ Lines 8Ω Phones 40Ω Phones GAIN SW*4 +24 dB (default) +18 dB +24 dB (default) +18 dB +24 dB (default) +18 dB +24 dB (default) +18 dB +24 dB (default) +18 dB - - Output Level Nominal Max. Before Clip +4 dBu (1.23 V) +24 dBu (12.28 V) -2 dBu (616 mV) +18 dBu (6.16 V) +4 dBu (1.23 V) +24 dBu (12.28 V) -2 dBu (616 mV) +18 dBu (6.16 V) +4 dBu (1.23 V) +24 dBu (12.28 V) -2 dBu (616 mV) +18 dBu (6.16 V) +4 dBu (1.23 V) +24 dBu (12.28 V) -2 dBu (616 mV) +18 dBu (6.16 V) +4 dBu (1.23 V) +24 dBu (12.28 V) -2 dBu (616 mV) +18 dBu (6.16 V) +4 dBu (1.23 V) +24 dBu (12.28 V) 75 mW*6 65 mW*6 150 mW 150 mW Connector XLR-3-32 Type (Balanced)*1 XLR-3-32 Type (Balanced)*1 XLR-3-32 Type (Balanced)*1 XLR-3-32 Type (Balanced)*1 XLR-3-32 Type (Balanced)*1 Phone Jack (TRS) (Balanced)*2 *5 Stereo Phone Jack (TRS) (Unbalanced)*3 *1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) *2. Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND) *3. PHONES stereo phone jacks are unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND) *4. There are switches inside the body to preset the maximum output level. *5. INSERT OUTs are only provided for PM5D. *6. The position of the level control is 10 dB lowered from Max. * In these specifications, 0 dBu = 0.775 Vrms. * All output DA converters are 24bit, 128 times (@48 kHz) oversampling. ❏ Analog Output Characteristics (DSP5D) Output Terminals OMNI OUT 1-24 Actual Source Impedance 150Ω For Use With Nominal 600Ω Lines GAIN SW *2 +24 dB (default) +18 dB *1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) *2. There are switches inside the body to preset the maximum output level. * In these specifications, 0 dBu = 0.775 Vrms. * All output DA converters are 24bit, 128 times (@48 kHz) oversampling. Output Level Nominal Max. before clip +4 dBu (1.23 V) +24 dBu (12.28 V) -2 dBu (616 mV) +18 dBu (6.16 V) Connector XLR-3-32 type (Balanced)*1 Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 385
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/385.png)