Yamaha DSP5D Owner's Manual - Page 116
Using the Tap Tempo function, e.g., Delay+ER., Echo, Chorus.
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
14 Effects 4 Click the STORE button. The EFFECT LIBRARY STORE window will appear, allowing you to name the library item you are saving. 5 Use the character palette to assign a name to the library item. For details on using the character palette, refer to p.30. 6 Click the STORE button. A window will ask you to confirm the Store operation. 7 To execute the Store operation, click the OK button. The data will be stored, and you will return to the previous screen. If you click the CANCEL button instead of the OK button, the Store operation will be aborted and you will return to the previous screen. Using the Tap Tempo function This section explains how to use the Tap Tempo function. "Tap tempo" is a function that lets you specify the delay time of a delay effect or the modulation speed of a modulation effect by striking a key at the desired interval. 1 From the effect library, recall a library item whose effect type uses a TEMPO parameter (e.g., Delay+ER., Echo, Chorus). TEMPO is a parameter that specifies a time-related effect parameter (the DELAY parameter of Delay+ER. or Echo, or the FREQ. parameter of Chorus, etc.) in terms of a BPM value or a manual setting. The TEMPO parameter is included in delay-type effects or modulation-type effects, and is shown in the lower left of the EFFECT PARAM screen. Hint For details on the parameters of each effect type, refer to the Appendices at the end of this manual (➥ p.325). 2 In the DISPLAY ACCESS section, repeatedly press the [EFFECT] key to access the EFFECT PARAM screen. The following illustration shows the screen when the "Delay→ER." effect type is selected. EFFECT PARAM 3 Move the cursor to the TAP TEMPO button, and repeatedly press the [ENTER] key at the desired tempo. (Alternatively, repeatedly click the TAP TEMPO button.) The average interval (BPM) at which you press the key will be calculated, and that value will be input for the TEMPO parameter. The average interval will be input (the average of a, b, and c) a b c First tap Second tap Third tap Fourth tap Hint • The Tap Tempo function is valid only for the currently displayed internal effect. However, it is ignored if the selected effect type does not include a TEMPO parameter. • If the average value is outside the range of 20-300 BPM, it will be ignored. • If desired, an external switch connected to the GPI connector can be used to operate the Tap Tempo function of the current page (➥ p.133). TAP TEMPO button 116 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/116.png)