Yamaha DSP5D Owner's Manual - Page 259
MUTE GROUP ASSIGN screen
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Information shown in the display Function menu Global functions Output functions 4 5 D SET BY CUE (Assign by [CUE] key) This specifies whether the [CUE] key will be used to make/cancel DCA group assignments. While the DCA group SET BY CUE button is on, pressing the [CUE] key of a channel that can be assigned to the corresponding group will assign the channel to the group. (Press the [CUE] key once again to cancel the assignment.) Hint • The SET BY CUE button can be turned on for only one DCA group. This is automatically turned off when you change screens or turn off the power. • To turn on SET BY CUE from the panel, press the ASSIGN MODE [DCA] key and then turn on the DCA group 7/8 [CUE] key. E CLEAR This button clears all output channels assigned to that DCA group. MUTE GROUP ASSIGN screen Here you can specify the output channels that will be assigned to mute groups 1-8. Muting can be switched on/ off together for channels assigned to the same mute group. MUTE GROUP ASSIGN 12 3 6 9 7 8 F MUTE These buttons switch muting on/off for DCA groups 7/ 8. They are linked with DCA [MUTE] keys 7/8 in the DCA strip of the panel. G DCA faders These faders adjust the levels of DCA groups 7/8. They are linked with DCA faders 7/8 in the DCA strip. H CUE These buttons cue-monitor DCA groups 7/8. They are linked with DCA [CUE] keys 7/8 in the DCA strip of the panel. I DCA LEVEL SET Use the following two buttons to operate DCA groups 7/8 together. • ALL NOMINAL Clicking this button will move DCA faders 7/8 to nominal level (0 dB). • ALL MINIMUM Clicking this button will move DCA faders 7/8 to the -∞ dB position. 4 A Mute group This area shows the mute group number. The number corresponding to the grid where the cursor is located is highlighted. B MUTE (Mute master) These buttons switch muting on/off for each mute group. These buttons are linked with the SCENE MEMORY [1]-[8] keys of the panel (if the MUTE MASTER button is On in the constantly-shown area at the bottom of the display). Hint When you turn muting on, channels belonging to that mute group will behave just as though their panel [ON] key had been turned off; no signal will be output. During this time, the panel [ON] key LED will blink. C Grid This grid lets you assign output channels (horizontal rows) to mute groups (vertical columns). Currentlypatched grids are indicated by a symbol. Move the cursor to the desired grid and press the [ENTER] key (or click) to set/cancel the assignment. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 259