Yamaha DSP5D Owner's Manual - Page 52
When sending a signal from an input channel to, a VARI type MIX bus
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5 Input channel operations Switches the signal sent from the input channel to the MIX bus on/ off. Input channels Adjusts the send level of the signal sent from the input channel to the MIX bus. MIX bus 4 To turn off the signal sent from that channel to a MIX bus, press the MIX [ON] key to turn it off. Press the MIX [ON] key once again to turn it back on. Note MIX buses can be switched (in units of two adjacent odd-numbered/even-numbered MIX buses) between VARI type (send levels are variable) and FIXED type (send levels are fixed). (For details on switching the type ➥ p.299) ❏ When sending a signal from an input channel to a VARI type MIX bus MIX1 MIX2 STEREO L STEREO R ...... INPUT CHANNEL 1 FADER ON PAN ...... MIX1 (VARI) LEVEL ON LEVEL ON MIX2 (VARI) INPUT CHANNEL 2 FADER ON PAN MIX1 (VARI) LEVEL ON LEVEL ON MIX2 (VARI) ❏ When sending a signal from an input channel to a FIXED type MIX bus ...... INPUT CHANNEL 1 FADER ON PAN ...... MIX1 MIX2 STEREO L STEREO R ON MIX1 (FIX) ON MIX2 (FIX) INPUT CHANNEL 2 FADER ON PAN ON MIX1 (FIX) ON MIX2 (FIX) If the send-destination MIX bus is set to FIXED mode, the MIX encoders have no effect; the signal can only be switched on/ off by the MIX [ON] key. 52 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section