Yamaha DSP5D Owner's Manual - Page 311
M/S screen, INPUT VIEW function, CH VIEW (Channel view) screen
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
Information shown in the display M/S screen For two adjacent odd-numbered/even-numbered input channels (or ST IN channel L/R), these settings convert the two-channel signal from an MS mic into L/R signals. M/S INPUT VIEW function CH VIEW (Channel view) screen This screen lists the mix parameters of the currently selected input channel. In this screen you can also edit the principal parameters and access other screens. CH VIEW Function menu Global functions Output functions Input functions Appendices 1 1 2 2 3 A S-GAIN knob This knob sets the proportionate level of the S mic relative to the level of the M mic. The current value is shown in the numerical box at the right. At the MONO position, the S mic level will be at -∞, at the STEREO position the M mic and S mic will be at the same level, and at the EXP.ST position the S mic level will be +10 dB. B M/S DECODE ON/OFF This button switches M/S decoding on/off for two adjacent odd-numbered/even-numbered input channels (or ST IN channel L/R). M/S decoding can be switched on even for channels that are not assigned as a stereo pair. C Channel This is the number and name of the input channel. Hint M/S is a stereo recording technique in which two microphones are used; a uni-directional M (Middle) mic and a bidirectional S (Side) mic. The M mic captures the main signal and the S mic captures the directional signal, and the sum (M+S) and difference (M-S) of the two signals (this procedure is known as "decoding") is recorded on the L and R channels respectively. 3 4 5 6 A Channel This is the number of the input channel you are editing. If the input channel is paired (or if a ST IN channel is selected), a heart symbol is displayed at the right. You can click this symbol to enable/disable pairing for the input channel. B HA (Head Amp) This area indicates the input port that is patched to the input channel, the setting of the internal head amp (PM5D-RH model only) or external head amp, and the input level. In this screen you can also adjust the head amp gain and switch phantom power (+48V) on/off. C ATT (Attenuation) This area shows the attenuation and ø (phase) settings. You can also adjust the attenuation and switch the phase from this screen. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 311
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/311.png)