Yamaha DSP5D Owner's Manual - Page 48

5 Input channel operations FADER FLIP/ENCODER MODE section In the FADER FLIP/ENCODER MODE section you can change the parameter that is assigned to the encoders, and exchange the parameters assigned to the faders and encoders. Items in the FADER FLIP/ENCODER MODE section A FADER [FLIP] key If this key is on, the parameters controlled by the faders and encoders will be exchanged. B Encoder mode indicator This indicates the number of the MIX bus (1-24) selected by the MIX SEND SELECT keys (6) or the encoder function selected by keys 3-5. C [PAN] key 2 345 This key selects pan (balance) as the parameter con- trolled by the encoders. The encoder mode indicator will indicate "Pn" while this key is on. 1 D [GAIN/ATT] key This key selects input sensitivity to the internal head amp (PM5D-RH model only) or external head amp device (AD8HR or AD824) or attenuation immedi- ately after AD conversion as the parameter controlled by the encoders. The encoder mode indicator will indi- cate "HA" (if input sensitivity to the head amp is selected) or "At" (if attenuator is selected) while this key is on. Note If you don't want it to be possible to select the attenuators, access the UTILITY function PREFERENCE 1 screen, and turn ATT OPERATION ON PANEL off (➥ p.206). 6 E [ALT LAYER] key This key selects "input level of the channel not included in the currently selected layer" as the parame- ter controlled by the encoders. The encoder mode indicator will indicate "AL" while this key is on. F MIX SEND SELECT [1]-[24] keys These keys select the MIX bus (1-24) whose send level will be controlled by the encoders. When you press one of these keys, the LED of that key will light, and the encoder mode indicator will show the number of the MIX bus. Hint If you turn on any key 3-6, the remaining keys will automatically turn off. 48 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section