Yamaha DSP5D Owner's Manual - Page 167
Information shown, in the display, Function, Output, Input, Appendices, Global
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Information shown in the display Function menu Global functions Output functions 8 9 J K L 5 6 7 E MIX BALANCE Adjusts the balance of the effect sound relative to the original sound. 0 (%) outputs only the original sound, and 100 (%) outputs only the effect sound. F BYPASS This button temporarily bypasses the effect. G CUE This button cue-monitors the output of the effect shown in the screen. Cue is automatically defeated when you switch to a different screen. (However, cue will be held if you switch to the EFFECT ASSIGN screen.) H Output meter Indicates the level of the signal being output from the effect. I Output patch This box lets you select the signal path that will be patched to the L/R output channels of the internal effect. The selection method is the same as for Input Patch. You can choose the following signal paths. CH1-CH48 STIN1-STIN4 (L/R) FXRTN1-FXRTN4 (L/R) INS CH1-INS CH48 INS ST1 (L/R)-INS ST4 (L/ R) INS MIX1-INS MIX24 INS MTRX1-INS MTRX8 INS ST A (L/R) INS ST B (L/R) INS MON (L/R/C) (PM5D only) Input channel 1-48 input ST IN channel 1-4 (L/R) input FX RTN channel 1-4 input Input channel 1-48 insert in ST IN channel 1-4 (L/R) insert in MIX channel 1-24 insert in MATRIX channel 1-8 insert in STEREO A channel (L/R) insert in STEREO B channel (L/R) insert in MONITOR channel (L/R/C) insert in Note Even if you've patched multiple channels in the INPUT PATCH/OUTPUT PATCH function INSERT PATCH screen, changing the input/output patch in this screen will turn off patching to other channels. J LIBRARY This button accesses the EFFECT LIBRARY screen for the currently selected effect. K TEMPO parameter If a delay-type or modulation-type effect type is selected, the tempo parameter will be displayed here. The TEMPO parameter specifies time-related parameters in units of BPM (Beats Per Minute). For a delaytype effect it sets the DELAY (delay time), and for a modulation-type effect it sets the FREQ. (modulation frequency). Note For some effect types, a parameter unique to the effect may be shown instead of the TEMPO parameter. For example if FREEZE is selected as the effect type, a button for recording/ playing the input signal is shown. The BPM value can be edited using the on-screen knob, or by repeatedly clicking the TAP TEMPO button. (In this case, the average interval between clicks is detected. If the average value is outside the range of 20- 300 BPM, it will be ignored.) The average of the intervals is input as the parameter value (average of a, b, and c) a b c First tap Second tap Third tap Fourth tap If the MIDI CLK button is on, the TEMPO parameter will synchronize to the MIDI timing clock being received from the MIDI port. L Effect parameters This area shows parameters for the currently selected effect type. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 167