Yamaha DSP5D Owner's Manual - Page 75
Changing the output patch settings, Input Patch / Output Patch operations
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
4 Click the grid where the desired patch-source and patch-destination intersect. The vertical and horizontal red lines indicate the grid position where the cursor is located. The SELECTED PATCH area in the upper left of the screen shows the input port and input channel for the grid at which the cursor is located. Input channel number Input channel name Input port When you click a grid, a window will ask you to confirm that you want to change the patch setting. 5 Click the OK button in the window. The new patch will be finalized, and a " " symbol will appear at the corresponding grid. To cancel the patch, click the " " symbol once again. Hint • If you want to change the patch directly without having to respond to the confirmation window, go to the UTILITY function PREFERENCE 1 screen and turn PATCH CONFIRMATION off (➥ p.204). • To move the cursor location rapidly in or out of the grid, hold down the [SHIFT] key and press the CURSOR keys. Note You can patch a single input port to multiple input channels, but you cannot patch multiple input ports to a single input channel. Changing the output patch settings Input Patch / Output Patch operations In the output patch section you can assign output chan- output jacks that are always connected. However, you nels to output ports. When the PM5D is in its initial state, are free to change this patching. MIX channels 1-24 are assigned to MIX OUT jacks 1-24. Other output channels are always connected to the following output jacks. 2 Use the horizontal scroll bar to display the patch-destination output port. The horizontal direction of the screen shows the patch 8 MIX channels 1-24 MIX OUT jacks 1-24 destination's output port type, ID number, port num- STEREO A/B channels MATRIX channels 1-8 STEREO OUT jacks A/B MATRIX OUT jacks 1-8 ber, and the number of output channels that are assigned to it. Monitor output L/R/C MONITOR OUT jacks L/R/C However you can edit the output patch settings so that the signals of these output channels are also sent from other output ports in parallel. Here's how to do this. From the top, this area shows the output port type, ID number, port number, and number of assigned output channels. 1 In the DISPLAY ACCESS section, press the OUTPUT [PATCH] key several times to access the OUTPUT PATCH screen. OUTPUT PATCH To patch an output port to an output channel, click this grid to display a " " symbol. Indicates the number of output ports assigned to the output channel. Indicates the output channel number. In the OUTPUT PATCH screen you can patch (assign) output channels to output ports. The horizontal direction of the screen shows the output ports (i.e., patch destinations), and the vertical direction of the screen shows the output channels (i.e., patch sources). When the PM5D is in its default state, MIX channels 1-24, MATRIX channels 1-8, and the STEREO A channel are patched to the output channels of slots 1-4 and the 2TR OUT DIGITAL jacks in addition to the You can select the following output ports. MIX OUT SLOT OUT 1-4 FX IN 1-8 2TR OUT D1/D2 MIX OUT jacks 1-24 Output channels (1-16) of an I/O card installed in slots 1-4 Inputs (L/R) of internal effects 1-8 2TR OUT DIGITAL jacks 1-2 (L/R) PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 75
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/75.png)