Yamaha DSP5D Owner's Manual - Page 61
STEREO A/B channel strip, Items in the STEREO A/B channel strip, Output channel operations
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
STEREO A/B channel strip The STEREO A/B channel strip lets you send the signal of the STEREO A/B channels to the MATRIX bus, and adjust the output level of the STEREO A/B channels. Items in the STEREO A/B channel strip A [TO MATRIX] LED This LED will light when the signal sent from the STEREO channel to the MATRIX bus is on. B [COMP] LED This indicates the operating status of the compressor for the STEREO channel. This will be dark when the gain reduction amount is 0 dB, dimly lit when it is 0- 6 10 dB, and lit when it is greater than 10 dB. 1 C STEREO A/B [SEL] key 3 This selects the STEREO A or STEREO B L/R channels 2 for editing in the SELECTED CHANNEL section or 4 display. The L/R channels will alternate each time you press the key. Output channel operations D STEREO [MONO] key 5 This switches the STEREO B channel to monaural. The status will alternate between monaural and stereo each time you press the key. E STEREO [ON] key This switches the STEREO channel on/off. If this key is off (LED dark), no signal will be output from that STEREO channel. F STEREO fader This 100 mm fader adjusts the output level of the STEREO channel. G STEREO [CUE] key This is used to monitor the STEREO A/B channel via the Cue Monitor/Solo function. 6 7 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 61
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/61.png)