Yamaha DSP5D Owner's Manual - Page 300
POST ON, POST ON/POST TO ST, POST TO ST, Type = FIXED, Pairing = disabled, DCH to MIX Channel to mix
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
MIX1 MIX2 STEREO L STEREO R PAN/ROUTING function ❏ POST ON The signal will be sent from immediately after the [ON] key. POST ON/POST TO ST= MIX1 MIX2 STEREO L STEREO R INPUT CHANNEL 1 ...... FADER ON TO ST PAN ...... MIX1 (VARI) LEVEL ON ON MIX2 (VARI) LEVEL ❏ POST TO ST The signal will be sent from immediately after the [TO STEREO] key. POST ON/POST TO ST= MIX1 MIX2 STEREO L STEREO R INPUT CHANNEL 1 ...... FADER ON TO ST PAN ...... MIX1 (VARI) LEVEL ON ON MIX2 (VARI) LEVEL Hint This setting applies to the signals sent from all input channels to the corresponding MIX bus. D CH to MIX (Channel to mix) In this area, the signals sent from input channels / ST IN channels (vertical columns) to MIX buses (horizontal rows) can be switched on/off and their level adjusted. The buttons and knobs displayed here will differ depending on the type (FIXED or VARI) of the senddestination MIX bus, and on whether the MIX buses are paired. ❏ Type = FIXED, Pairing = disabled Input channel 1 ↓ MIX bus 2 Input channel 2 ↓ MIX bus 2 Input channel 1 ↓ MIX bus 1 Input channel 2 ↓ MIX bus 1 SEND ON/OFF button On/off switch for the signal sent from input channels to each MIX bus. INPUT CHANNEL 1 ...... FADER ON PAN ...... ON MIX1 (FIX) ON MIX2 (FIX) INPUT CHANNEL 2 FADER ON PAN ON MIX1 (FIX) ON MIX2 (FIX) 300 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/300.png)