Yamaha DSP5D Owner's Manual - Page 185

Information shown in the display Function menu Global functions • When the START OFFSET button is on Edit the time (start offset time) after which the fader or pan parameter of the corresponding channel will begin changing when you recall a scene for which the Fade function is enabled. E SET ALL This button enables the Fade function for all input channels or output channels. F CLEAR ALL This button disables the Fade function for all input channels or output channels. 4 56 D Channel settings Here you can turn the Fade function on/off and specify the fade time (or the start offset time) for each input channel / output channel. Use the channel name buttons to switch the Fade function on/off. The box below each button lets you specify the fade time or start offset time. Move the cursor to a box, and turn the [DATA] encoder or click the / buttons at the left and right to edit the value. The color of the numerical value shown in the box will change as follows. • When the FADE TIME button is on The value is displayed in white for channels whose start offset time is "----" (unset), and in light blue for channels that are set to 0.1 or above. • When the START OFFSET button is on The value is displayed in red for channels whose start offset time is "----" (unset), and in yellow for channels that are set to 0.1 or above. If desired, you can copy the fade time / offset time value from one channel to another as follows. Move the cursor to the box that displays the value you want to copy; then hold down the [SHIFT] key and press the [ENTER] key to access the JOB SELECT window. Output functions Input functions Appendices In this window, select the copy-destination item and click the OK button; the value of the selected channel will be copied. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 185