Yamaha DSP5D Owner's Manual - Page 149

Executing functions assigned to the User Defined keys, Using the FADER MODE

Page 149 highlights

5 Assign functions to other keys and banks in the same way. Hint The User Defined key assignments are not saved in the scene. If desired, you can save the assignments on a memory card as USER DEFINED KEY data. Executing functions assigned to the User Defined keys Here's how to use the USER DEFINED [1]-[25] keys to execute the functions that have been assigned to them. 1 In the DISPLAY ACCESS section, repeatedly press the [UTILITY] key to access the USER DEFINE screen. 2 In the BANK SELECT area at the upper left of the screen, use the A-D buttons to select the bank (A-D) you want to use. 3 Press a USER DEFINED [1]-[25] key. The function assigned to that key will be executed. Using the FADER MODE section In the FADER MODE section you can switch the channels that are assigned to DCA faders 1-8 of the panel DCA strip. For each of six layers A-F, you can specify the channel that is assigned to each fader. For example, you might use this to simultaneously control the send level and return level of an internal effect, or to use a fader as the master fader of a MIX bus or MATRIX bus. In tandem with switching the FADER MODE section layer, you can also switch the machine being controlled by panel operations, the INPUT channel strip, the ST IN/FX RTN channel strip, and the STEREO A/B channel strip layer. For each layer you can specify the channel/machine/layer that is assigned to each fader, and use the FADER MODE section to switch between layers while you operate the faders. Items in the FADER MODE section In the FADER MODE section you can select the layers or DCA groups that will be controlled. Assigning the FADER MODE section layer Here's how to assign the desired channel/machine/layer to the FADER MODE section layers. 1 In the DISPLAY ACCESS section, repeatedly press the [UTILITY] key to access the FADER ASSIGN screen. In this screen, you can select the desired channel/ machine/layer for each layer A-F. FADER ASSIGN 1 2 A FADER MODE [A]-[F] keys These switch the layer for DCA faders 1-8, the machine affected by panel operations, the INPUT channel strip, the ST IN/FX RTN channel strip, and STEREO A/B channel strip. B FADER MODE [DCA] key If this button is on, DCA faders 1-8 will control DCA groups 1-8. Other functions 19 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 149

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382
  • 383
  • 384
  • 385
  • 386
  • 387
  • 388
  • 389
  • 390
  • 391
  • 392
  • 393
  • 394
  • 395
  • 396
  • 397
  • 398
  • 399
  • 400
  • 401
  • 402
  • 403
  • 404
  • 405
  • 406
  • 407
  • 408
  • 409

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Operating section
149
19
Other functions
5
Assign functions to other keys and banks in
the same way.
Hint
The User Defined key assignments are not saved in the
scene. If desired, you can save the assignments on a mem-
ory card as USER DEFINED KEY data.
Here’s how to use the USER DEFINED [1]–[25] keys to
execute the functions that have been assigned to them.
1
In the DISPLAY ACCESS section, repeatedly
press the [UTILITY] key to access the USER
DEFINE screen.
2
In the BANK SELECT area at the upper left of
the screen, use the A–D buttons to select the
bank (A–D) you want to use.
3
Press a USER DEFINED [1]–[25] key.
The function assigned to that key will be executed.
Using the FADER MODE section
In the FADER MODE section you can switch the channels that are assigned to DCA faders 1–8 of the panel DCA strip. For
each of six layers A–F, you can specify the channel that is assigned to each fader. For example, you might use this to simulta-
neously control the send level and return level of an internal effect, or to use a fader as the master fader of a MIX bus or
MATRIX bus.
In tandem with switching the FADER MODE section layer, you can also switch the machine being controlled by panel opera-
tions, the INPUT channel strip, the ST IN/FX RTN channel strip, and the STEREO A/B channel strip layer.
For each layer you can specify the channel/machine/layer that is assigned to each fader, and use the FADER MODE section to
switch between layers while you operate the faders.
In the FADER MODE section you can select the layers or
DCA groups that will be controlled.
A
FADER MODE [A]–[F] keys
These switch the layer for DCA faders 1–8, the machine
affected by panel operations, the INPUT channel strip,
the ST IN/FX RTN channel strip, and STEREO A/B
channel strip.
B
FADER MODE [DCA] key
If this button is on, DCA faders 1–8 will control DCA
groups 1–8.
Here’s how to assign the desired channel/machine/layer to
the FADER MODE section layers.
1
In the DISPLAY ACCESS section, repeatedly
press the [UTILITY] key to access the FADER
ASSIGN screen.
In this screen, you can select the desired channel/
machine/layer for each layer A–F.
Executing functions assigned to the
User Defined keys
Items in the FADER MODE section
2
1
Assigning the FADER MODE section
layer
FADER ASSIGN