Yamaha DSP5D Owner's Manual - Page 115

Editing the effect parameters Here's how to edit the parameters of an internal effect. 1 In the DISPLAY ACCESS section, repeatedly press the [EFFECT] key to access the EFFECT PARAM screen. The lower part of the screen will show knobs and buttons for editing the parameters of the currently selected effect. The content of the parameters will depend on the type of the currently selected effect. EFFECT PARAM Effect parameters The effect module you are controlling Storing settings in the effect library Here's how to store effect parameter settings in the effect library. 1 In the DISPLAY ACCESS section, repeatedly press the [EFFECT] key to access the EFFECT PARAM screen. EFFECT PARAM LIBRARY button The effect module whose data you want to store 2 Use the box in the upper left of the screen to select the effect module you want to control. 3 Use the knobs and buttons in the lower part of the screen to edit the effect parameters. For details on the effect parameters, refer to the Appendices at the end of this manual. Hint The parameter settings for internal effect modules 1-8 are saved in the scene. The settings of individual effects can also be stored in the effect library independently of scene memory. 2 Use the box in the upper left of the screen to select the effect module whose settings you want to store, and click the LIBRARY button. The EFFECT LIBRARY screen will appear, allowing you to recall or store settings in the effect library. EFFECT LIBRARY Effects 14 "R" (read-only) 3 In the library list, choose the store-destination number and click that line. Note Library items for which an "R" (read-only) appears in the right column of the list are factory preset library items. These numbers cannot be overwritten. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 115