Yamaha DSP5D Owner's Manual - Page 272
SIGNAL FLOW screen, Channels, Insert, Level meters, Signal flow
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
OUTPUT VIEW function SIGNAL FLOW screen This screen shows the signal flow for adjacent odd-numbered/even-numbered MIX/MATRIX channels or for STEREO A/B channels. In this screen you can also edit some of the parameters, and access other screens. You can also determine the location within the signal flow at which clipping occurred. SIGNAL FLOW 3 C Level meters These meters indicate the levels within the signal flow. Levels are detected at the following locations. • EQ (immediately before and after the EQ) • COMP (immediately before and after the compressor) • FADER (immediately before and after the fader) • DELAY (immediately before and after the delay) • INSERT IN (immediately after the insert point) 1 2 A Channels These are the numbers and names of the channels you are editing. By clicking the / buttons at left and right, you can switch the display in units of two channels. If the corresponding MIX/MATRIX channels are paired (or if a STEREO A/B channel is selected), a heart symbol is displayed at the right. You can click this symbol to enable/disable pairing for the MIX/MATRIX channels. B Insert This area displays insert-related information for the two selected channels (insert point, the ports patched to insert in/out, and insert on/off status). Here you can also select the insert point (use the / buttons at left and right), or switch insertion on/off (use the ON/OFF button). 4 D Signal flow This area indicates the signal flow of the selected channel. The following parameters are displayed. • EQ (Equalizer) This indicates the EQ on/off status and the approximate response curve. You can click the EQ button to switch EQ on/off, or click the mini-graph to access the EQ PARAM screen for the corresponding channel. • COMP (Compressor) This indicates the compressor on/off status and the approximate response curve. You can click the COMP button to switch the compressor on/off, or click the mini-graph to access the COMP PARAM screen for the corresponding channel. • FADER This indicates the output level of the channel. This is linked with the encoder or fader of the corresponding channel. • ON/OFF (On/off) Turns the channel on/off. This is linked with the [ON] key of the corresponding channel. • DELAY Here you can switch the internal delay on/off and edit the delay time. Hint • If insert is enabled, the currently selected insert point is shown in this signal flow. • If the signal clips, the signal flow (horizontal line) after clipping is displayed in red. If an output is turned off so that the signal does not flow any further, the subsequent flow is displayed in gray. If PEAK HOLD is on, the flow indication will stay red if clipping occurs even once, making it easier to see that clipping has occurred. 272 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section