Yamaha DSP5D Owner's Manual - Page 206
Preference Screen 2, Gbrightness Htrack Pad/mouse Iscreen Tips
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
UTILITY function Button name Corresponding parameters Screen that appears OUTPUT MASTER MIX/MATRIX channel output level OUTPUT VIEW function FADER VIEW screen • MAKE PAIR ON PANEL If this button is on, you can use the [SEL] keys to set/ defeat pairing. In Horizontal Pair mode, you can set/ defeat pairing by simultaneously pressing the [SEL] keys of two pairable channels. In Vertical Pair mode, you can set/defeat pairing by holding down the [SHIFT] key and pressing the [SEL] key of one of the channels. (For more about pair modes ➥ p.53) • USE ENCODER-ON AS +48V If this button is on, the ENCODER [ON] key located above the encoder will turn the phantom power (+48V) on/off when HA (head amp input sensitivity) is selected as the encoder mode. • DCA/MUTE FLASH INDICATE If this button is on, the DCA [MUTE] key LED and the DCA assign LED for channels belonging to that DCA group will blink when you turn on a DCA [MUTE] key (DCA section). • MIX MINUS CONFIRMATION If this button is on, a confirmation message will appear when you execute the Mix Minus setting (hold down the [SEL] key of an input channel and press the [SEL] key of a MIX channel) from the panel. • SCENE UP/DOWN KEY This specifies what the SCENE MEMORY [π]/[†] keys will do when pressed in the SCENE screen. You can choose one of the following two operations. SCENE +1/-1 . . . . . Pressing the SCENE MEMORY [π] key will select the next highest-numbered scene, and pressing the SCENE MEMORY [†] key will select the next lowest-numbered scene. (Key presses will increment/decrement the scene number.) LIST UP/DOWN . . Pressing the SCENE MEMORY [π] key will scroll the list upward, and pressing the SCENE MEMORY [†] key will scroll the list downward. (Key presses will scroll the list upward/downward.) • LIST ORDER This specifies the order in which scene memories and library items will appear in the screen. NORMAL Show the list in ascending numerical order. REVERSE Show the list in descending numerical order. • ATT OPERATION ON PANEL If this button is on, you will be unable to use the panel encoders to operate the attenuator. • MIX SEL/ENCODER MODE LINK If this button is on, using the panel [SEL] keys or onscreen operations to select MIX channels 1-24 will select the MIX SEND SELECT [1]-[24] keys of the FADER FLIP ENCODER MODE section in tandem. In the same way, pressing MIX SEND SELECT [1]-[24] keys will select MIX channels 1-24. ❏ PREFERENCE screen 2 7 8 9 G BRIGHTNESS Here you can make settings for the brightness of the panel LED and LCD displays. • PANEL UNITY POINT If this button is on, LEDs corresponding to a specific reference value (e.g., 0 dB or CENTER) will light more brightly than usual. However, this is valid only if PANEL BRIGHTNESS is set to 5 or less. • PANEL ASSISTANCE If this button is on, even LEDs that should be off will stay dimly lit so that you can tell their location even in a dark environment. However, this is valid only if PANEL BRIGHTNESS is set to 5 or less. • PANEL BRIGHTNESS This adjusts the brightness of all panel LEDs in a range of 1-8. • LCD BRIGHTNESS You can adjust the brightness of the LCD display in a three-step range: HIGH, MID, or LOW. • LCD BACK LIGHT You can adjust the brightness of the LCD display backlight in a two-step range: HIGH or LOW. H TRACK PAD/MOUSE Here you can make settings for the built-in track pad or a PS/2 mouse connected to the MOUSE connector. • TRACK PAD TAPPING This enables/disables the Tapping function (a function that lets you perform the track pad left-click operation by tapping quickly on the track pad). • MOVING SPEED This selects the speed at which the cursor in the screen will move when you operate the built-in track pad or a PS/2 mouse connected to the MOUSE connector. Choose one of three speeds; FAST, MID, or SLOW. I SCREEN TIPS • SHOW SCREEN TIPS If this button is on, moving the cursor onto an item in the screen and waiting for a short time will (in some cases) display a "screen tip" reminding you of the operation. The screen tip is displayed when you open the JOB SELECT window by holding down the [SHIFT] key and pressing the [ENTER] key, or when you need to press the [ENTER] key to finalize an edited value. 206 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/206.png)