Yamaha DSP5D Owner's Manual - Page 17
ST IN/FX RTN Stereo in / Effect return, USER DEFINED KEYS s
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
8 9 N OP Q JR R K M LT S O CUE/MONITOR section This section selects the monitor source that is output from the MONITOR OUT jacks, and adjusts the lev- els. This section also determines the cue point and 2 monitoring method that will be used when you press a [CUE] key for a channel (➥ p.99). Top, front, and rear panels P OSCILLATOR/TALKBACK section This section switches the oscillator or talkback on/off, and adjusts the talkback level (➥ p.105). Q DISPLAY ACCESS section This section selects the functions or screen shown in the display (➥ p.24). R USER DEFINED KEYS sections This section executes the functions that have been assigned to the User Defined keys [1]-[25] (➥ p.148). S Data entry section This section lets you move the pointer (the arrow displayed in the screen) or cursor (the red frame indicating a selection) in the display and edit the parameter value (➥ p.24). T ASSIGN MODE section This section lets you assign mute groups and DCA groups for control from the panel (➥ p.81). I Display This display shows the information you need to operate the PM5D, and lets you make system-wide settings and control mix parameters for input and output channels (➥ p.23). Hint You can adjust the angle of the display by moving the upper part of the display frame forward or backward. Note Before moving the PM5D, you must lower the display all the way back until it is fastened in place. J FADER MODE section Here you can select the combination of channels or DCA groups that will be controlled by the faders of the DCA strip section (K) (➥ p.149). K DCA strip section From this section you can control the channels assigned to DCA groups 1-8 (➥ p.81). L ST IN/FX RTN (Stereo in / Effect return) channel strip section This section controls the principal parameters of ST IN channels 1-4 or FX RTN channels 1-4 (➥ p.47). M STEREO strip section This section controls the principal parameters of the STEREO A/B channels (➥ p.61). N SCENE MEMORY section This section stores/recalls mix parameters as scene memories (➥ p.88). Mute operations for mute groups 1-8 are also performed in this section (➥ p.83). PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 17