Yamaha DSP5D Owner's Manual - Page 74
Input Patch / Output Patch operations, Changing the input patch settings
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
8 Input Patch / Output Patch operations 8 Input Patch / Output Patch operations This chapter explains how to edit the input patch and output patch settings, and how to use insert connections and direct output. Changing the input patch settings The input patch section lets you assign input ports to input channels. In the PM5D's default state, the input patch settings assign the following signals to input channels. Input channels 1-48 ST IN channels 1-4 FX RTN channels 1-4 Input signals from INPUT jacks 1-48 Input signals from ST IN jacks 1-4 (L/R) Output signals of internal effects 1-4 (L/R) However, you will need to edit the input patch settings if you want input signals from an I/O card installed in slots 1-4 or input signals from a 2TR IN DIGITAL jack to be assigned to an input channel. Here's how to do this. 1 In the DISPLAY ACCESS section, press the INPUT [PATCH] key several times to access the INPUT PATCH screen. INPUT PATCH 2 Use the left/right scroll bar to display the patch-source input port. The horizontal direction of the screen shows the patch source's input port type, ID number, port number, and the number of input channels that are assigned to it. To view input ports that are not currently visible, use the horizontal scroll bar or the [DATA] encoder. From the top, this shows the input port type and ID number, the port number, and the number of input channels currently assigned. To patch an input port to an input channel, click this grid to display a " " symbol. Indicates the number of input ports assigned to the input channel. Indicates the name of the input channel. Indicates the number of the input channel. The INPUT PATCH screen is where you can patch (assign) input ports (rear panel input jacks or input channels of I/O cards) to input channels. The horizontal direction of the screen shows the input ports (i.e., patch sources), and the vertical direction of the screen shows the input channels (i.e., patch destinations). If an input port is patched to an input channel, a symbol is displayed at the intersecting grid. You can select the following input ports. AD IN 1-48 AD ST IN 1-4 SLOT IN 1-4 FX OUT 1-8 2TR IN D1-D3 2TR IN A1/A2 INPUT jacks 1-48 ST IN jacks 1-4 (L/R) Input channels (1-16) of slots 1-4 Outputs (L/R) of internal effects 1-8 2TR IN DIGITAL jacks 1-3 (L/R) 2TR IN ANALOG jacks 1/2 3 Use the vertical scroll bar to display the patchdestination input channel. The vertical direction of the screen shows the patchdestination input channels. To see channels that are not currently visible, use the vertical scroll bar. Alternatively, you can hold down the [SHIFT] key and turn the [DATA] encoder. The following input channels can be selected. CH 1-48 STIN1L/1R-STIN4L/4R FXRTN1L/1R-FXRTN4L/4R Input channels 1-48 ST IN channels 1-4 (L/R) FX RTN channels 1-4 (L/R) 74 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section