Yamaha DSP5D Owner's Manual - Page 137
USER DEFINED KEYS, TALLY other, Make settings for other GPI OUT ports in the, same way.
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
❏ USER DEFINED KEYS Operation of a User Defined key on the PM5D will be the trigger for outputting a signal from the GPI OUT port. To edit the setting, click the button at the left to open the GPI OUT PORT ASSIGN window; from the list, select the User Defined key bank (A-D) and number (1-25), and choose the trigger mode (how the trigger will operate when the key is pressed). You can choose one of the following trigger modes. • LATCH Alternate between active and inactive each time the key is pressed. • UNLATCH Active only while the key remains pressed. The following illustration shows how the output signal from the GPI OUT port changes when you operate a User Defined key in each of the trigger modes. (This illustration shows operation when is selected as the POLARITY of the GPI OUT port. If POLARITY is , the polarity of the output signal will be the opposite.) LATCH UNLATCH ❏ TALLY (other) Other operations on the PM5D will be the trigger for outputting a signal from the GPI OUT port. When the corresponding operation is executed on the PM5D, a control signal will be output. This control signal will be held until you defeat the above operation (or until that GPI OUT port receives a different trigger). To edit the settings, click the button at the left to open the GPI OUT PORT ASSIGN window, and select one of the following functions. Function PM5D operation NO ASSIGN No assignment POWER ON The PM5D's power is turned on SOLO ON [SOLO] key is turned on GPI IN 1 FUNCTION The function assigned to GPI IN port 1 becomes active GPI IN 2 FUNCTION The function assigned to GPI IN port 2 becomes active GPI IN 3 FUNCTION The function assigned to GPI IN port 3 becomes active GPI IN 4 FUNCTION The function assigned to GPI IN port 4 becomes active PREVIEW ON SCENE MEMORY section [PREVIEW] key is turned on CUE ON [INPUT ONLY] Input channel [CUE] key is turned on CUE ON [DCA ONLY] DCA [CUE] key is turned on CUE ON [OUTPUT ONLY] Output channel [CUE] key is turned on CUE ON Any [CUE] key is turned on 5 Make settings for other GPI OUT ports in the same way. With these settings, executing an operation assigned to the GPI OUT port will output a control signal according to the POLARITY setting. You can use the TEST buttons in the GPI OUT area to check the operation of the GPI OUT ports. When a TEST button is on, the corresponding GPI OUT port will become active, and a control signal will be output. The GPI OUT status column indicates the status of the output signal of the corresponding port. The characters L/H indicate the Low or High level of the signal. The background color is yellow when active, and gray when inactive. 16 Remote control PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 137
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/137.png)