Yamaha DSP5D Owner's Manual - Page 246
INSERT POINT screen, Insert view, OUTPUT CH Output channel, ON/OFF Insert on/off
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
OUTPUT PATCH function INSERT POINT screen In this screen you can select the position at which the insert-in/out of each output channel will be patched. Here you can also switch insert-in on/off. INSERT POINT 2 3 4 1 A Insert view When you move the cursor to the insert I/O point (4), the insert point for that output channel will be shown graphically. 56 B OUTPUT CH (Output channel) This is the number and name of the output channel you are editing. Two paired channels are indicated by a heart symbol shown at the left; settings 3-4 will be linked for these channels. You can click this symbol to enable/disable pairing. C ON/OFF (Insert on/off) This button switches insert on/off for each channel. This is linked for paired channels. Note Be aware that if you turn on this button when either insert-in or insert-out are unpatched, the signal will no longer be output from the corresponding output channel. D INSERT I/O (Insert I/O point) Here you can select one of the following as the insertin/out location for each output channel. PRE EQ POST EQ PRE FADER POST ON Immediately before the EQ Immediately after the EQ Immediately before the fader Immediately after the [ON] key E SET ALL Turns on the corresponding item (insert or the insert point) for all channels (including channels not currently shown in the screen). F CLEAR ALL Turns insert off for all channels (including channels not currently shown in the screen). 246 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/246.png)