Yamaha DSP5D Owner's Manual - Page 381
General Specifications, PM5D/PM5D-RH
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 381 highlights
Information shown in the display Function menu Global functions You paired input channels, but the ❍ Set the paired input channels to the same phase setting. Even when channels are paired, the phase set- signal phase is incorrect tings are not linked. (➥ p.53) When you recall a scene, some channels/parameters are not updated ❍ Could those channels/parameters be set to Recall Safe or Selective Recall? (➥ p.92, 94) You turn on a CUE button in the EFFECT PARAM screen, but it is automatically defeated ❍ This is defeated automatically when you switch screens in the display. (➥ p.167) Can't make boost settings with the GEQ ❍ In the GEQ PARAM screen, could LIMIT be set to -24 dB? (➥ p.119) When you recall a scene, it takes a certain amount of time for the faders ❍ Could you have specified a fade time? (➥ p.95) to stop The panel LEDs or LCD display are too dark / too bright ❍ In the UTILITY function PREFERENCE 2 screen, use the BRIGHTNESS setting to adjust the brightness. (➥ p.206) Can't control the DSP5D that's cascade-connected to the PM5D ❍ Are the PM5D and DSP5D correctly cascade-connected? ❍ In the SYS/W.CLOCK function MIXER SETUP screen, is CASCADE CONNECTION set to the correct type? ❍ If the units are cascade-connected via the DCU5D, could two Ethernet cables be connected? To allow bi- directional communication, connect one Ethernet cable between the DCU5D and DSP5D. ❍ Is the DSP5D's machine ID number set correctly? ❍ In the SYS/W.CLOCK function MIXER SETUP screen, is the setting CASCADE ENABLED? ❍ Have you used a user-defined key or FADER MODE key to select the machine that you want to control from the PM5D? MIX channel signal is not sent from MIX OUT connector ❍ For the output channel, is a MIX channel patched to the MIX OUT jack? Can't load from memory card ❍ Is the memory card formatted as FAT16? ❍ In the UTILITY function SECURITY screen, is the LOAD LOCK button turned off? General Specifications PM5D/PM5D-RH Sampling Frequency Signal Delay Fader Fader Resolution Maximum Voltage Gain Crosstalk (@1kHz) Dimensions Net Weight Power Requirements Operation free-air Temperature Range Storage Temperature Range Included Accessories Optional Accessories Internal: External: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz 44.1 kHz (-10%) to 48 kHz (+6%) 88.2 kHz (-10%) to 96 kHz (+6%) PM5D: PM5D-RH: Less than 2.3 ms INPUT to STEREO A,B (@Fs = 48 kHz) Less than 1.15 ms INPUT to STEREO A,B (@Fs = 96 kHz) Less than 2.5 ms INPUT to STEREO A,B (@Fs = 48 kHz) Less than 1.25 ms INPUT to STEREO A,B (@Fs = 96 kHz) 100mm motorized x38 +10 to -138, -∞ dB (1024 steps/100 mm) PM5D: 84 dB INPUT1-48 to Each Output PM5D-RH: 86 dB INPUT1-48 to Each Output -80 dB Adjacent Input Channels (INPUT1-48), GAIN: Min. 1551 x 950 x 283 mm (W x D x H) PM5D: 98 kg PM5D-RH: 97 kg PM5D: 480W, DC 24V, 20A (Use PW800W Only) PM5D-RH: 528W, DC 24V, 22A (Use PW800W Only) +10 °C to +35 °C -20 °C to +60 °C Owner's Manual Gooseneck Lamps x 3 Power Supply PW800W Connection Cable mini YGDAI cards Power Supply PW800W Power Supply Link Cable PSL120 Output functions Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 381
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/381.png)