Yamaha DSP5D Owner's Manual - Page 277
Input functions, INPUT PATCH function
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Information shown in the display Function menu Global functions Output functions Input functions INPUT PATCH function INPUT PATCH screen Here you can assign input ports (INPUT jacks, ST IN jacks, 2TR IN DIGITAL/ANALOG jacks, input channels of slots, outputs of internal effects) to input channels. INPUT PATCH 1 5 2 3 4 A SELECTED PATCH This indicates the name and number of the input channel at which the cursor is located, and the input port. B CH (Input channel) This is the number and name of the input channel (input channel, ST IN channel, FX RTN channel) assigned to the input port. The channel number at which the cursor is located will be highlighted. If you click the name, a window will open allowing you to assign a name to the channel. C ASSIGN For each channel, this indicates the number (1 or 0) of input ports currently assigned. D Grid This grid lets you patch input ports (horizontal rows) to input channels (vertical columns). Currentlypatched grids are indicated by a symbol. By clicking a grid location you can set/cancel patching. The red lines at the left and top indicate the grid location to which you move the cursor. Hint • If PATCH CONFIRMATION is turned on in the PREFERENCE 1 screen (UTILITY function), a confirmation message will appear each time you attempt to change a patch setting. If STEAL PATCH CONFIRMATION is turned on, a confirmation message will also appear when you attempt to make patch settings that would cause an existing patch to be modified. • To move the cursor location rapidly in or out of the grid, hold down the [SHIFT] key and press the CURSOR keys. • To move rapidly to left or right inside the grid, turn the [DATA] encoder. To move up or down, hold down the [SHIFT] key and turn the [DATA] encoder. Note You can patch multiple input channels to a single input port, but you cannot patch multiple input ports to a single input channel. E Input port From the top, this area indicates the type of input port, the ID number, the input channel number, and the number of input channels assigned. The following types of input port can be selected. AD IN AD STIN SLOT IN FX OUT 2TR IN INPUT jacks 1-48 L/R channels of ST IN jacks 1-4 Input channels of an I/O card installed in slots 1-4 L/R outputs of internal effects 1-8 L/R channels of 2TR IN DIGITAL jacks 1-3 and 2TR IN ANALOG jacks 1/2 Hint • The port number is grayed-out for ports that are currently unavailable. • If the CASCADE connector is being used as a SLOT IN port, the port number of the CASCADE connector is displayed in yellow instead of the SLOT IN port number. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 277
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/277.png)