Yamaha DSP5D Owner's Manual - Page 152

19 Other functions Using Parameter Lock or Console Lock Here's how to lock parameters or the console. You can also lock using the password you specified. 1 In the DISPLAY ACCESS section, repeatedly press the [UTILITY] key to access the SECURITY screen. LOCK PARAMETER SELECT area SECURITY 3 Depending on the items you want to lock, click either the PARAMETER LOCK button, LOAD LOCK button or CONSOLE LOCK button. If a password has been specified, a window will ask you to input the password. If you click the CANCEL button without inputting a password in this window, you will return to the previous screen. Note If the LOAD LOCK button is on, synchronization can occur only from this unit to PM5D Editor/DSP5D Editor (not the reverse) when synchronizing with PM5D Editor/DSP5D Editor. 2 If you want to lock only specific parameters, use the buttons of the LOCK PARAMETER SELECT area to select the parameters for which you want to prohibit editing. When you click a button, a check mark will appear for the selected item. You can select the following items (multiple selections are allowed). Item Content SYSTEM CONFIG- Changes to the settings of the MIXER URATION SETUP screen and CASCADE screen WORD CLOCK SETUP Changes to the word clock setting DITHER Changes to dither-related settings INPUT PATCH Changes to the input patch settings (and names) OUTPUT PATCH Changes to the output patch settings INPUT CH ON/OFF Input channel on/off operations OUTPUT CH ON/ OFF Output channel on/off operations MIX TO ST ON/OFF MIX TO STEREO button on/off operations DCA MUTE ON DCA [MUTE] key On operations (Off operations are not included) Note • As long as the PARAMETER LOCK button is on, the above settings cannot be edited. You will need to defeat the lock function before editing them. • If you turn on the RECALL LOCK button, the specified parameters will also be unaffected by scene or library recall operations. 4 Input the password you assigned beforehand, and click the OK button. If you clicked the PARAMETER LOCK button in step 3, a message of "Parameter Locked" will appear briefly, and then editing will be disabled for the selected parameters. If you clicked the CONSOLE LOCK button in step 3, an indication of "CONSOLE LOCKED" will appear on the screen, and all operations other than pressing the UNLOCK button will be disabled. 5 To defeat Parameter Lock, click the PARAMETER LOCK button. To defeat Console Lock, click the UNLOCK button. If a password has been specified, a window will ask you to input the password. Input the password and click the OK button to defeat the lock function. You will return to the screen in which you were prior to applying the security setting. Note The console password will be cleared when the PM5D is powered-off. In contrast, the system password is remembered even after the power is turned off. This means that if you forget the system password, you will be unable to defeat Parameter Lock or Console Lock except by initializing the entire memory of the PM5D (➥ p.160). Please be careful not to lose the system password. 152 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section