Yamaha DSP5D Owner's Manual - Page 308
LCR screen, TO ST button of the CH to MIX screen PAN/ROUT
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
PAN/ROUTING function D TO ST (To stereo) If this button is on, the corresponding input channel is assigned to the STEREO bus. This is linked with the TO ST button of the CH to MIX screen (PAN/ROUTING function). E DIRECT If this button is on, the signal of the corresponding input channel will be sent to the output port selected as the direct output. This is linked with the DIRECT OUT ON/OFF button in the INSERT/DIRECT OUT POINT screen (IN PATCH function). F Output port This area indicates the output port that is patched in the DIRECT OUT PATCH screen (INPUT PATCH function) to the direct output of this input channel J LCR screen Here you can make settings for LCR mode, which allows three-channel playback by adding a CENTER channel to the L/R channels of the STEREO bus. LCR 7 8 9 G ALL STEREO Clicking this button enables the assignment of all input channels to the STEREO bus. H ALL BUS Clicking this button enables the assignment of all input channels to FIXED-type MIX buses. I ALL CLEAR Clicking this button cancels all assignments in the FIX ASSIGN VIEW screen. J SURROUND MODE This indicates the currently selected surround mode. Except for the fact that the send-sources are input channels, the display and operations are the same as in the MATRIX/ST function LCR screen. Refer to p.267. 308 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section