Yamaha DSP5D Owner's Manual - Page 227

Information shown in the display Function menu Global functions Output functions • DCA FADER MODE Switching the mode of the top panel FADER MODE section • ENCODER MODE Switching the mode of the top panel ENCODER MODE section • PANEL/LCD BRIGHTNESS BRIGHTNESS settings in the PREFERENCE 2 screen (UTILITY function) • INPUT METER POINT/OUTPUT METER POINT/ PEAK HOLD Input channel / output channel metering point selection, and peak hold on/off • DCA LEVEL/MUTE DCA group 1-8 level, name, [CUE] key on/off operations, and [MUTE] key on/off operations Hint DCA and MUTE parameter values will be linked the instant Link is turned on. Other parameters will be linked for the first time only when that parameter is operated after Link is turned on. • MUTE MASTER Mute group 1-8 on/off Hint • For details on the actual procedure of cascade-connecting multiple PM5D/DSP5D units, refer to p.153. • In the case of a system that is cascade-connected to the DSP5D, the system will always operate as though the CASCADE LINK area's LINK button is on; this setting cannot be changed. Other operations may also be linked. • To enable cascade link, you must turn on linking for the corresponding parameters on the other cascade-connected PM5D units as well. • You can also turn linking off for the master PM5D. For example if you've cascade-connected multiple PM5D units, you can (for example) make settings so that DCA 1 is linked only between the master and the second unit, DCA 2 is linked for all PM5D units, and DCA 3 is linked only between the second unit and third unit. 3 45 6 C CASCADE IN SOURCE (Cascade IN source I/ O assignment view) Here you can view and select the signals that are sent to the PM5D/DSP5D's internal buses from the cascadeconnected external device. The type of signals received will depend on the selection in the CASCADE FROM field of the MIXER SETUP screen (SYS/W.CLOCK function.) External device selected in the CASCADE FROM field PM5D/ DM2000/ MIXER MIXER DSP5D*1 02R96*1 [30BUS] [16BUS]*2 MIX 1 BUS 1 SLOT4- 1 MIX 2 BUS 2 SLOT4-2 MIX 3 BUS 3 SLOT4-3 MIX 4 BUS 4 SLOT4-4 MIX 5 BUS 5 SLOT4-5 MIX 6 BUS 6 SLOT4-6 MIX 7 BUS 7 SLOT4-7 MIX 8 BUS 8 SLOT4-8 MIX 9 AUX 1 SLOT4-9 MIX10 AUX 2 SLOT4-10 MIX11 AUX 3 SLOT4-11 MIX12 AUX 4 SLOT4-12 MIX13 AUX 5 SLOT4- 1 MIX14 AUX 6 SLOT4- 2 MIX15 MIX16 AUX 7 AUX 8 SLOT4- 3 *3 SLOT4- 4 MIX17 AUX 9 SLOT4- 5 MIX18 AUX10 SLOT4- 6 MIX19 AUX11 SLOT4- 7 MIX20 AUX12 SLOT4- 8 MIX21 - SLOT4- 9 MIX22 - SLOT4-10 MIX23 - SLOT4-11 MIX24 - SLOT4-12 ST AL ST L SLOT4-13 ST AR ST R SLOT4-14 ST BL - SLOT4- 9 ST BR - SLOT4-10 CUE L CUE L SLOT4-15 CUE R CUE R SLOT4-16 Destination bus MIX 1 MIX 2 MIX 3 MIX 4 MIX 5 MIX 6 MIX 7 MIX 8 MIX 9 MIX10 MIX11 MIX12 MIX13 MIX14 MIX15 MIX16 MIX17 MIX18 MIX19 MIX20 MIX21 MIX22 MIX23 MIX24 ST AL ST AR ST BL ST BR CUE L CUE R *1. The signal assigned to each bus is fixed; it cannot be changed. *2. You can enable/disable the assignment for each bus. However, you cannot send the signal of the same slot or same input channel to multiple buses. If a signal already assigned to a bus is selected for a different bus, the previous assignment will be cancelled. *3. Assigned from the top in ascending numerical order of slot number / channel number, according to the settings of the CASCADE IN PORT SELECT area of the MIXER SETUP screen (SYS/W.CLOCK function). (this cannot be changed.) D CASCADE IN ON/OFF For each of the PM5D/DSP5D's internal buses, you can specify whether signals from the cascade master will be input. E PARAM LINK (parameter link) For each pair of adjacent odd-numbered/even-numbered channels, this specifies whether the PM5D/ DSP5D's channel parameters will be linked to output the identical signal. F CASCADE OUT ON/OFF For each of the PM5D/DSP5D's internal buses, you can specify whether signals will be output to the cascade slave. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 227