Yamaha DSP5D Owner's Manual - Page 28

3 Basic operation on the PM5D 2 To move quickly to the outer edge of the current window or to a different window, hold down the [SHIFT] key and use the CURSOR keys. You will move from the scroll window in which the cursor is currently located, in the direction of the key you pressed. Scrolling the screen A scroll bar is displayed if there are more items than can be shown in a single screen. To scroll the screen, drag the box shown in the bar. ➠ [SHIFT] key + CURSOR [®] key Drag You can also scroll the screen by clicking the vacant portion of the scroll bar or the / buttons or / buttons located at the ends of the scroll bar. Hint If the cursor is located on a grid such as in a PATCH screen, turning the [DATA] encoder clockwise will move the cursor toward the right, and turning it counterclockwise will move the cursor toward the left. If you are holding down the [SHIFT] key, turning the [DATA] encoder clockwise will move the cursor downward, and turning it counterclockwise will move the cursor upward. Click these buttons to move the scroll bar box step-wise in the direction indicated. Clicking the / buttons will move in larger steps than clicking the / buttons. Click in these areas to make the scroll bar box move by a large step in the corresponding direction; the screen will scroll accordingly. If you move the cursor to the scroll bar and press the [DEC/CANCEL] key or turn the [DATA] encoder counterclockwise, the screen will scroll toward the left (or upward, in the case of vertical scrolling). If you press the [INC/OK] key or turn the [DATA] encoder clockwise, the screen will scroll toward the right (or downward, in the case of vertical scrolling). Hint If the cursor is located at the scroll bar box, holding down the [SHIFT] key and turning the [DATA] encoder will have the same result as clicking the button or button, depending on the direction in which you turn the encoder. 28 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section