Yamaha DSP5D Owner's Manual - Page 45
INPUT channel strip, Items in the INPUT channel strip, Input channel operations, PRE] key
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
INPUT channel strip The INPUT channel strip is the section where you can control the principal parameters of the input channels. This section is layered as shown in the following diagram; choose the CH 1-24 layer when you want to control input channels 1-24, or the CH 25-48 layer when you want to control input channels 25-48. Note If the console is cascade-connected to a DSP5D, you can use user-defined keys (➥ p.148) or the FADER MODE key (➥ p.149) to select a DSP5D layer. 5 CH 1-24 layer Input channel operations CH 25-48 layer Items in the INPUT channel strip 2 3 4 5 J K 1 6 L 7 M N O P 8 9 A [CH 1-24]/[CH 25-48] keys These keys select the layer (CH 1-24 or CH 25-48) controlled by the INPUT channel strip. The LED of the currently selected layer will light. B [PRE] key This selects the output location of the signal when send level to MIX bus 1-24 is selected as the encoder function. The pre-fader signal is sent to the corresponding MIX bus if this key is on, and the post-fader signal is sent if this key is off. C ENCODER [ON] key This switches the function currently assigned to the encoder on/off. By default, this switches the signal sent from the input channel to MIX buses 1-24 on/off. D Encoder According to the selection in the ENCODER MODE section / FADER FLIP section (➥ p.48), this encoder adjusts the send level from the input channel to MIX buses 1-24, the panning of the input channel, or the level of the input channel in the layer that is not currently selected. By default, this adjusts the send level to MIX buses 1-24. E [SEL] key This selects the input channel that you will control from the SELECTED CHANNEL section or from within the display. F Name indicator This displays the name that has been assigned to the input channel. G CH [ON] key Switches the input channel on/off. If this key is off (LED dark), no signal will be sent from that input channel to the STEREO bus or MIX buses. H Fader This 100 mm fader adjusts the input level of the input channel. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 45
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/45.png)