Yamaha DSP5D Owner's Manual - Page 162
Adjusting the analog input gain (PM5D-RH model only), Adjusting the output gain, Other functions
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
19 Other functions Adjusting the analog input gain (PM5D-RH model only) If necessary, you can make fine adjustments in steps of 0.1 dB to the gain of the specified analog input port. Since the input levels of all ports are set to match each other when the PM5D is shipped from the factory, you will normally not need to change these settings. Note • Since these are set to optimal values at the factory, the default values will differ between input ports. Initializing the internal memory will return these settings to their factory-set values. • Fine adjustments of the DSP5D's input/output gain should be made from DSP5D Editor. Adjusting the output gain If necessary, you can make fine adjustments in steps of 0.01 dB to the gain of the specified output port. The factory setting is 0.00 dB. To adjust the gain, click the / buttons located at the left and right of each box to specify the gain of each output port in 0.01 dB units. If you want to reset all output ports to 0.00 dB, click the FACTORY PRESET button. Click the OK button to apply the settings. To adjust the gain, click the / buttons located at the left and right of each box to specify the gain of each input port in 0.1 dB units. If you want to restore all input ports to their factory settings, click the FACTORY PRESET button. Click the OK button to apply the settings. 162 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/162.png)