Yamaha DSP5D Owner's Manual - Page 99
Monitor and Cue, About the MONITOR and CUE s
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
11 Monitor and Cue This chapter explains the PM5D's Monitor and Cue functions. About the MONITOR and CUE sections The MONITOR section sends the signal selected as the monitor source to the MONITOR OUT jacks. You can select the following signals as the monitor source. • The input signal from 2TR IN ANALOG jacks 1/2 • The input signal from 2TR IN DIGITAL jacks 1-3 • The output signal of the STEREO A/B channels • The output signal of the LCR channels • The output signal of a pre-selected MIX channel 1-24 or MATRIX channel 1-8 Note If the PM5D is cascade-connected to the DSP5D, the DSP5D's cue operations will occur in tandem. The CUE section sends the cue signal of the channel/group selected by a panel [CUE] key to the CUE OUT jacks. Hint If the CUE INTERRUPTION button is turned on in the MONITOR screen (MON/CUE function), the Cue/Solo signal will also be sent from the MONITOR OUT jacks when Cue/Solo is active. Note Since the DSP5D does not have monitor functionality, the keys and knobs of the MONITOR section will always operate the settings of machine #1 (PM5D). Similarly, the CUE [LEVEL] knob will always operate the settings of machine #1 (PM5D). PM5D 11 Monitor and Cue DSP5D ON PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 99
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/99.png)