Yamaha DSP5D Owner's Manual - Page 384
Input/output characteristics, Analog Input Characteristics PM5D
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 384 highlights
Input/output characteristics Input/output characteristics ❏ Analog Input Characteristics (PM5D) Input Terminals PAD GAIN INPUT 1-48 -60dB 0 -16dB 26 ST IN1-4 [L,R] -34dB - 10dB INSERT IN 1-48 - 2TR IN ANALOG 1,2 [L,R] - TALKBACK - Actual Load For Use With Impedance Nominal 50-600Ω Mics 3kΩ & 600Ω Lines 4kΩ 600Ω Lines 10kΩ 600Ω Lines 10kΩ 600Ω Lines 50-600Ω Mics 3kΩ & 600Ω Lines GAIN SW *4 Sensitivity *1 - - - +24 dB (default) +18 dB -80 dBu (0.0775 mV) -36 dBu (12.3 mV) -10 dBu (245 mV) -54 dBu (1.55 mV) -10 dBu (245 mV) -16 dBu (123 mV) -6 dBu (388 mV) -12 dBu (195 mV) - -60 dBu (0.775 mV) Input Level Nominal -60 dBu (0.775 mV) -16 dBu (123 mV) +10 dBu (2.45 V) -34 dBu (15.5 mV) +10 dBu (2.54 V) +4 dBu (1.23 V) +4 dBu (1.23 V) -2 dBu (0.616 V) -50 dBu (2.45 mV) Max. Before Clip -40 dBu (7.75 mV) +4 dBu (1.23 V) +30 dBu (24.51 V) -14 dBu (155 mV) +30 dBu (24.51 V) +24 dBu (12.28 V) +24 dBu (12.28 V) +18 dBu (6.16 V) Connector XLR-3-31 Type (Balanced)*2 XLR-3-31 Type (Balanced)*2 Phone Jack (TRS) (Balanced)*3 XLR-3-31 Type (Balanced)*2 -30 dBu XLR-3-31 Type (24.5 mV) (Balanced)*2 ❏ Analog Input Characteristics (PM5D-RH) Input Terminals INPUT 1-48 ST IN1-4 [L,R] 2TR IN ANALOG 1,2 [L,R] TALKBACK GAIN -62dB +10dB -62dB +10dB - - Actual Load Impedance 3kΩ 3kΩ 10kΩ 3kΩ For Use With Nominal 50-600Ω Mics & 600Ω Lines 50-600Ω Mics & 600Ω Lines 600Ω Lines 50-600Ω Mics & 600Ω Lines Input Level GAIN SW *4 Sensitivity *1 Nominal - - +24 dB (default) +18 dB -82 dBu (61.6 µV) -10 dBu (245 mV) -82dBu (61.6 µV) -10 dBu (245 mV) -6 dBu (388 mV) -12 dBu (195 mV) -62 dBu (0.616 mV) +10 dBu (2.45 V) -62 dBu (0.616 mV) +10 dBu (2.45 V) +4 dBu (1.23 V) -2 dBu (0.616 V) - -60 dBu (0.775 mV) -50 dBu (2.45 mV) Max. Before Clip -42 dBu (6.16 mV) +30 dBu (24.5 V) -42 dBu (6.16 mV) +30 dBu (24.5 V) +24 dBu (12.28 V) +18 dBu (6.16 V) Connector XLR-3-31 Type (Balanced)*2 XLR-3-31 Type (Balanced)*2 XLR-3-31 Type (Balanced)*2 -30 dBu XLR-3-31 Type (24.5 mV) (Balanced)*2 *1. Sensitivity is the lowest level that will produce an output of +4 dBu (1.23 V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are maximum position.) *2. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) *3. Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND) *4. There are switches inside the body to preset the maximum input level. * In these specifications, 0 dBu = 0.775 Vrms. * All input AD converters are 24bit linear, 128 times (@48 kHz) oversampling. * PM5D: +48V DC (phantom power) is supplied to INPUT (1-48) XLR type connectors via each individual switch, and TALKBACK XLR type connectors via software switch. PM5D-RH: +48V DC (phantom power) is supplied to INPUT (1-48) and TALKBACK XLR type connectors via master mechanical switch and each individ- ual software switch. 384 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/384.png)