Yamaha DSP5D Owner's Manual - Page 182
RECALL SAFE screen, SAFE KEY MODE SELECT Safe Key Mode, selection, OUTPUT ISOLATION
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
SCENE function When using Selective Recall, parameters of which only one instance for every two adjacent odd-numbered/even-numbered channels/modules will be handled as follows if only one of the channels/modules is set to Selective Recall. • PAIR These parameters will not be recalled. • GATE STEREO LINK • COMP STEREO LINK • GEQ LINK The LINK parameter will be forcibly turned off (linking will be disabled). • DELAY GANG • ATT GANG The GANG parameter will be recalled. If GANG is turned on because of the recall, operation will maintain the difference in the DELAY/ATT parameter values following the recall. • MS DECODE • FIXED/VARI These parameters will not be recalled. • PAN MODE The PAN MODE parameter will be recalled. However if the PAN MODE would be changed by the recall from BALANCE to any other setting, or if it would be changed to BALANCE from any other setting, the PAN MODE and PAN parameters will not be recalled. If the recall causes PAN MODE to be set to GANG PAN, the difference in PAN parameter values will be maintained for operation following the recall. Note • Recall Safe and Selective Recall can be used together. Channels/parameters excluded from recall operations by either Recall Safe or Selective Recall (or both) will not be recalled. • Selective Recall applies when a scene is recalled in PREVIEW mode. • When you recall a scene, there may be cases in which a conflict in pairing settings between Recall Safe and Selective Recall causes the settings of a parameter to differ between L and R channels. In such cases, the parameter will be linked when it is next operated. RECALL SAFE screen Here you can specify parameters/channels that will be excluded from recall operations for all scenes. RECALL SAFE 1 2 A SAFE KEY MODE SELECT (Safe Key Mode selection) If the HA+CH button is on, Recall Safe will also turn on/off for the HA patched to the corresponding channel when you operate the panel [RECALL SAFE] key or the RECALL SAFE button (INPUT VIEW function CH VIEW screen) to turn Recall Safe on/off. If the CH button is on, this will not be linked. B OUTPUT ISOLATION If the ON button is on, output channels and parameters to be excluded from recall operations can be memorized in SETUP memory (not included in memory card load operations) separately from the Recall Safe function (➥ p.180). 182 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/182.png)