Yamaha DSP5D Owner's Manual - Page 83
Controlling DCA groups, Using mute groups, Assigning channels to mute groups
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Controlling DCA groups Here's how you can use the DCA strip to control DCA groups. 1 In the FADER MODE section, make sure that the FADER MODE [DCA] key LED is lit. The FADER MODE section selects the function of the DCA strip faders. When the FADER MODE [DCA] key LED is lit, you can use the faders of the DCA strip to control DCA groups 1-8. FADER MODE [DCA] key 2 Use the faders of the channel strip to adjust the relative levels between the channels belonging to the DCA group you want to use. 3 Operate the DCA fader for the DCA group you want to use. The level of the channels assigned to that DCA fader will change while preserving the level differences you established in step 2. 4 If you want to mute a DCA group, press the [MUTE] key for that DCA group in the DCA strip. The [MUTE] key will light, and muting will be turned on for channels belonging to that DCA group (the same state as if the faders were lowered to -∞ dB). At this time, the name indicator for that DCA group will be dimmed. Hint If desired, you can cause the DCA assign LEDs of the corresponding input channels to blink while the DCA group is muted. To do so, turn on the DCA/MUTE FLASH INDICATE setting in the PREFERENCE 1 screen (UTILITY screen). 5 To un-mute a DCA group, press the lit [MUTE] key in the DCA strip. Using mute groups 9 This section explains how to assign channels to mute groups and use the panel keys to control them. Grouping and linking Assigning channels to mute groups From the panel, you can assign channels to mute groups either by selecting a specific channel and specifying the mute groups to which that channel will belong, or by selecting a specific mute group and specifying the channels that will belong to that mute group. ❏ To select the mute groups to which a specific channel will belong 1 Press a [SEL] key to select the channel for which you want to make assignments. 2 In the SELECTED CHANNEL section, use the MUTE [1]-[8] keys to select the mute group to which the channel will be assigned (you may select more than one mute group). The LEDs will light for MUTE [1]-[8] key(s) that are turned on. If an input channel is selected, its corresponding mute assign LED(s) in the channel strip will also light. MUTE [1]-[8] keys Mute assign LEDs 3 Select the mute group(s) for other channels in the same way. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 83
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/83.png)