Yamaha DSP5D Owner's Manual - Page 297

Information shown in the display Function menu Global functions Output functions MUTE GROUP ASSIGN screen Here you can specify the input channels that will be assigned to mute groups 1-8. Muting can be switched on/ off together for channels assigned to the same mute group. MUTE GROUP ASSIGN 45 D SET BY CUE (Assign by [CUE] key) This specifies whether the [CUE] key will be used to make/cancel DCA group assignments. While the DCA group SET BY CUE button is on, pressing the [CUE] key of an input channel that can be assigned to the corresponding group will assign the channel to the group. (Press the [CUE] key once again to cancel the assignment.) Hint The SET BY CUE button can be turned on for only one DCA group. This is automatically turned off when you change screens or turn off the power. E CLEAR This button clears all input channels assigned to that DCA group. 6 7 9 Except for the fact that these settings apply to input channels, the display and operations are the same as in the OUTPUT DCA/GROUP function MUTE GROUP ASSIGN screen. Refer to p.259. Hint Mute groups 1-8 can be used with both input channels and output channels. Both types of channel can exist in the identically-numbered mute group. 8 F MUTE These buttons switch muting on/off for DCA groups 1-8. They are linked with DCA [MUTE] keys 1-8 in the DCA strip of the panel. G DCA faders These faders adjust the levels of DCA groups 1-8. They are linked with DCA faders 1-8 in the DCA strip. H CUE These buttons cue-monitor DCA groups 1-8. They are linked with DCA [CUE] keys 1-8 in the DCA strip of the panel. I DCA LEVEL SET Use the following two buttons to operate DCA groups 1-8 together. • ALL NOMINAL Clicking this button will move DCA faders 1-8 to nominal level (0 dB). • ALL MINIMUM Clicking this button will move DCA faders 1-8 to the -∞ dB position. Input functions Appendices PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 297