Yamaha DSP5D Owner's Manual - Page 244
INSERT PATCH screen, FLIBRARY button ASELECTED PATCH BInsert in/out CCH Output channel
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
OUTPUT PATCH function 6 INSERT PATCH screen In this screen you can patch the input/output ports into which external devices will be inserted. Select the output port in the left side of the screen, and the input port in the right side of the screen. INSERT PATCH F LIBRARY button This button accesses the OUTPUT PATCH LIBRARY screen (➥ p.247), where you can store/recall patch library settings for output channels. Hint • The signal from immediately after the delay and immediately before the output port attenuation will be sent to output ports you patch in this screen. Subsequently, in the case of SLOT OUT and 2TR OUT, the specified output port attenuation will be applied respectively. • The rear panel MATRIX OUT jacks 1-8, and STEREO OUT jacks A/B always output the signal of the corresponding output channel. They are not affected by the settings in this screen. 1 2 A SELECTED PATCH This indicates the number and name of the output channel at which the cursor is located in the grid. B Insert in/out This indicates the input/output ports that are patched as insert in/out for the output channel at which the cursor is located. If multiple ports are assigned for insert-out, only the first port is displayed. 6 3 45 C CH (Output channel) This area shows the numbers and names of the output channels (MIX channels, MATRIX channels, STEREO A/B channels, MONITOR L/R/C channels). The channel number at which the cursor is located will be highlighted. When you click the name area, a window will appear, allowing you to assign a name to the channel. Note On the DSP5D, this is unavailable for the MONITOR L/R/C channels. 244 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/244.png)