Yamaha DSP5D Owner's Manual - Page 250
OUTPUT EQ function, EQ PARAM (EQ Parameter) screen
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
OUTPUT EQ function OUTPUT EQ function 1 EQ PARAM (EQ Parameter) screen Here you can edit the EQ parameters of the selected output channel. EQ PARAM 5 2 3 64 9 87 (If a MIX channel or STEREO A/B channel is selected) EQ PARAM (If a MATRIX channel is selected) A Channel selection Select the output channel that you want to edit. You can use eight-band EQ (four UPPER bands + four LOWER bands) for MIX channels and STEREO A/B channels, and four-band EQ for MATRIX channels. If a channel is paired (or if a STEREO A/B channel is selected), a heart symbol is displayed at the right. For MIX channels or MATRIX channels, you can click this symbol to enable/disable pairing. B EQ ON/OFF (EQ on/off) Turns the EQ on/off for that channel. C EQ LINK GROUP Selects the EQ link group (A-H) to which the EQ of that channel belongs. EQ parameters are linked for output channels belonging to the same group. Note The EQ of MIX channels and STEREO A/B channels can be assigned only to groups A-F, and the EQ of MATRIX channels can be assigned only to groups G/H. D LIBRARY This button accesses the OUTPUT EQ LIBRARY screen (➥ p.252), where you can store/recall EQ library settings for output channels. E EQ TYPE Selects the type of EQ. Turning the TYPE I button on selects the algorithm used in the 02R series. Turning the TYPE II button on selects a newly developed algorithm. TYPE II reduces the interference between bands. F EQ graph This graph shows the approximate response of the EQ parameters. The colored vertical lines indicate the FREQ (center frequency) of the band for the parameter at which the cursor is located. (The color of each line matches the knob markings for each band.) The response curve will change when you edit the Q or GAIN of each band. G Level meter These meters indicate the peak levels before EQ and after EQ. If the signal clips before EQ, the OVER segment will light. H EQ FLAT This button resets the GAIN parameters of all bands to the default value (±0.0 dB). When you click this button, a confirmation message will appear. I LOWER/UPPER (only for MIX channels and STEREO A/B channels) This indicator shows which four bands (LOWER or UPPER) are selected in the SELECTED CHANNEL section of the panel. The text label of the selected group is displayed in yellow. 250 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/250.png)