Yamaha DSP5D Owner's Manual - Page 173

Information shown in the display GEQ ASSIGN screen This screen lists the approximate values of the GEQ module settings, and shows the input/output levels. The signal path assignments and on/off status can also be edited in this screen. GEQ ASSIGN 6 F DSP CONFIGURATION This box lets you change the number of assignments for the internal effects and GEQ modules. If you decrease the number of internal effects, the number of available GEQ modules will increase by one. The number of internal effects can be changed between eight units (twelve GEQ modules) to zero available internal effects (twenty GEQ modules). Note If you change the DSP CONFIGURATION setting, the internal effects or GEQ modules may be muted briefly. Function menu Global functions Output functions Input functions Appendices 1 23 4 5 A Level meter This meter indicates the peak level before and after the GEQ module. B Fader graph This indicates the approximate fader position for each band. When you click this area, the GEQ PARAM screen for the corresponding GEQ module will appear. You can also drag and drop this area onto another GEQ module to copy the GEQ settings. C GEQ ON/OFF button Switches the GEQ module on/off. D Insert destination Indicates the location at which the GEQ module is inserted. You can also specify the insert location from within this screen. E LINK button This button indicates the link status of adjacent oddnumbered → even-numbered GEQ modules. When you turn this button on, a window will appear, allowing you to select whether the parameters will be copied from one module to the other, or whether both modules will be initialized. PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section 173