Yamaha DSP5D Owner's Manual - Page 71
Compressor operations, pressor parameters.
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Compressor operations Hint • The type of the currently selected compressor is shown in Here's how you can use the SELECTED CHANNEL section to operate the internal compressor. the COMP PARAM screen (➥ p.253, 291). • The COMP LIBRARY screen also provides other library set- tings suitable for a wide variety of instruments or purposes. Note The PM5D provides four types of built-in compressor; COMP (compressor), EXPANDER (expander), COMPANDER H Settings you edit can also be stored in the library. • For a detailed explanation of each type of compressor, refer to the Appendices (➥ p.322). (hard compander), and COMPANDER S (soft compander). These four operate in different ways. This means that if you want to use a compressor, you must load compressor settings of the desired type from the compressor library, and then edit the parameters as desired. 4 After selecting a library item, click the RECALL button located at the lower left of the library list. The library item you selected in step 3 will be recalled 1 Press a [SEL] key to select the channel you want to control. A compressor is available for all channels except for FX RTN channels. 2 In the DISPLAY ACCESS section, press the INPUT [GATE/COMP] key (for an input chan- to the channel you selected in step 1. 5 In the SELECTED CHANNEL section, press the COMP [ON] key to make the LED light. The compressor of the selected channel will be activated. nel) or OUTPUT [COMP] key (for an output channel) several times to access the COMP LIBRARY screen. COMP GR meter 7 COMP LIBRARY COMP [ON] key Using the Selected Channel section RECALL button Scroll bar In the COMP LIBRARY screen you can store compressor settings in the library, or recall existing data from the library. The operations described below are the same for the COMP LIBRARY screen of both output channels and input channels. 3 Move the cursor to the scroll bar of the library list in the lower right of the screen, and turn the [DATA] encoder to select the library item that you want to load. (The library item selected in the list is highlighted.) Numbers 001-036 for which an "R" is shown at the right of the list contain read-only preset library items. Numbers 001-004 contain preset library items of different types. It is convenient to use these library items when you want to select a specific type. Preset library items 001-004 are respectively of the following types. Number Name 001 Comp 002 Expand 003 Compander (H) 004 Compander (S) Type COMP (Compressor) EXPANDER COMPANDER H (Hard compander) COMPANDER S (Soft compander) 6 You can use the compressor controls of the SELECTED CHANNEL section to edit the compressor parameters. The amount of gain reduction produced by the compressor is shown by the COMP GR meter in the SELECTED CHANNEL section. Hint • For details on the function of the compressor controls, refer to p.68. • More detailed parameters for the compressor (selection of the key-in signal, stereo link on/off, assignment to a compressor link group) can be edited in the COMP PARAM screen of the INPUT GATE/COMP function or the OUTPUT COMP function (➥ p.253, 291). • You can also cause the COMP PARAM screen to appear automatically when you operate a compressor-related control. This setting is made in the UTILITY function PREFERENCE 1 screen (➥ p.204). PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 71
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/71.png)